1. Home
  2. Education
  3. GPA Calculator
Education

GPA Calculator

Calculate a simple credit-weighted GPA on a 4.0 scale.

Your numbers

comma separated
comma separated

Results update as you type. Nothing you enter is sent anywhere.

Result

3.63

36.3 quality points ÷ 10 credits.

Formula used

GPA = Σ(grade points × credits) ÷ Σ credits

This GPA calculator turns a list of course grades and their credit hours into a single credit-weighted grade point average on the standard 0–4 scale. It is built for students checking a semester GPA, projecting a cumulative GPA, or confirming the number printed on a transcript. Because each course counts in proportion to its credits, a four-credit lab moves your GPA more than a one-credit seminar.

How to use the GPA calculator

  1. Convert each letter grade to points using your school's scale (for example A = 4, B = 3, C = 2) and type them into Grade points, separated by commas.
  2. Type the credit hours for the same courses, in the same order, into Credits. The two lists must contain the same number of entries.
  3. Leave out pass/fail, audited and withdrawn courses, since they normally carry no grade points.
  4. Read the result, which is rounded to two decimal places, and the detail line that shows total quality points and total credits.

How the gpa calculation works

FormulaGPA = Σ(grade points × credits) ÷ Σ credits

How the credit-weighted average works

Each course contributes quality points equal to its grade points multiplied by its credits. The calculator adds those quality points, adds the credits, and divides the first total by the second. This matches the method the National Center for Education Statistics describes for its transcript studies: total grade points earned divided by total credits attempted.

The weighting matters more than people expect. An A in a one-credit course and a C in a four-credit course do not average to a B. They produce (4 × 1 + 2 × 4) ÷ 5 = 2.4, because the heavier course dominates.

Turning letter grades into grade points

The calculator accepts numbers, not letters, because schools disagree about plus and minus grades. The NCES transcript study uses A = 4, B = 3, C = 2, D = 1 and F = 0, but many colleges assign values such as 3.7 to an A− and 3.3 to a B+, and some give an A+ more than 4. Check the grading policy in your catalog or student handbook and enter the values it lists.

This tool only accepts grade points from 0 to 4. If your school awards 4.3 for an A+, or adds honors and AP bonus points, use the Weighted GPA Calculator, where you set the maximum of the scale yourself.

Semester GPA versus cumulative GPA

To find a semester GPA, enter only that term's courses. For a cumulative GPA you do not have to retype every past course: treat your existing GPA as one big entry. Put your current cumulative GPA in Grade points with your total earned credits beside it, then add the new term's courses after it.

This shortcut works because a GPA is already an average of quality points per credit, so multiplying it by its credits recovers the original quality points. It breaks down if your school replaces grades for repeated courses, because the old attempt should then drop out of the total.

Worked examples

A four-course semester

Grade points: 4,3.3,3,2.7 · Credits: 4,3,3,2

  1. Calculus (A, 4 credits): 4 × 4 = 16 quality points.
  2. Chemistry (B+, 3 credits): 3.3 × 3 = 9.9 quality points.
  3. History (B, 3 credits): 3 × 3 = 9 quality points.
  4. Spanish (B−, 2 credits): 2.7 × 2 = 5.4 quality points.
  5. Total quality points: 16 + 9.9 + 9 + 5.4 = 40.3.
  6. Total credits: 4 + 3 + 3 + 2 = 12.
  7. GPA = 40.3 ÷ 12 = 3.3583…, shown as 3.36.

Result: 3.36

Updating a cumulative GPA after one more term

Grade points: 3.5,4 · Credits: 60,15

  1. Existing record: a 3.5 GPA over 60 credits, so 3.5 × 60 = 210 quality points.
  2. New term: straight A's over 15 credits, so 4 × 15 = 60 quality points.
  3. Combined quality points: 210 + 60 = 270.
  4. Combined credits: 60 + 15 = 75.
  5. New cumulative GPA = 270 ÷ 75 = 3.6.

Result: 3.6

Assumptions and limits

Simple weighted average on a 0–4 scale. Schools may use different grade mappings and policies.

Formula and worked examples last checked November 20, 2026. Spotted a problem? Report an error.

Frequently asked questions

Is a 3.5 GPA good?

On a 4.0 scale, a 3.5 means your average grade sits halfway between a B and an A. Whether it is competitive depends on the program you are applying to and how your school grades. Many scholarships and honors programs publish their own GPA cutoffs, so check those directly.

Why doesn't my GPA match the one on my transcript?

The usual causes are plus/minus values that differ from the ones you entered, repeated courses where the school replaces the earlier grade, or transfer credits that count toward graduation but not toward GPA. Pass/fail and audited courses are also normally excluded from the calculation.

How many credits does it take to raise my GPA?

Use the cumulative shortcut and test scenarios. With a 2.8 GPA over 90 credits, a 4.0 semester of 15 credits gives (2.8 × 90 + 4 × 15) ÷ 105 = 2.97. The more credits already on your record, the smaller the effect of each new term.

Can I enter an A+ as 4.3?

Not in this calculator, which rejects grade points above 4 so that results stay on the standard 4.0 scale. If your school awards 4.3 for an A+, enter the grades in the Weighted GPA Calculator and set the maximum scale to 4.3.

Do failed courses count in GPA?

At most schools, yes. An F carries 0 grade points, but its credits still go into the denominator, so it pulls the average down. Enter it as 0 with its full credit hours unless your school has replaced the grade.

What is the difference between GPA and a percentage average?

A GPA averages grade points weighted by credits, while a percentage average combines raw scores. Two students with the same 4.0 GPA can have very different percentages, because every score in the A range converts to the same 4 points.

Sources