1. Home
  2. Conversions
  3. Pressure Converter
Conversions

Pressure Converter

Convert pascals and other units in the same measurement family.

Your numbers

Results update as you type. Nothing you enter is sent anywhere.

Result

100 kPa

Factor 100 kPa per bar. Standard atmosphere = exactly 101,325 Pa. Gauge vs absolute pressure is not inferred.

Formula used

Output = input × source base-unit factor ÷ destination factor

Convert pressure between pascals, kilopascals, megapascals, bar, standard atmospheres and pounds per square inch. Typical uses are tire and pump pressures, weather and scuba readings, and engineering specs that mix psi and kPa.

How to use the Pressure calculator

  1. Enter the reading in Value.
  2. Choose the unit shown on your gauge or spec in From, and the unit you want in To.
  3. Read the result. The calculator converts the number only; it does not change gauge pressure into absolute pressure.

How the pressure calculation works

FormulaOutput = input × source base-unit factor ÷ destination factor

Gauge pressure versus absolute pressure

Most gauges, including tire gauges, read pressure above the surrounding air. That is gauge pressure (sometimes written psig). Absolute pressure adds the atmosphere on top, roughly 14.7 psi or 101.3 kPa at sea level. Converting 35 psi gauge to kPa gives 241.3 kPa gauge; it does not become an absolute value unless you add the atmosphere yourself.

The distinction matters when a spec sheet or formula asks for absolute pressure, as gas law calculations do. To get it, convert the gauge reading, then add the local atmospheric pressure in the same unit. Weather reports give that figure, often in hPa or millibars; 1 hPa is 100 Pa, so 1,013 hPa is 101.3 kPa.

The defined units

The pascal is the SI unit, one newton per square meter. A bar is exactly 100,000 Pa and a standard atmosphere is exactly 101,325 Pa, so 1 atm is 1.01325 bar. One psi is about 6,894.757 Pa. A MPa (one million pascals) is common for hydraulic and material strength figures.

Worked example

A tire pressure in kilopascals

Value: 35 · From: psi · To: kPa

  1. 1 psi = 6,894.757293 Pa = 6.894757 kPa.
  2. 35 × 6.894757293 = 241.3165053.
  3. Rounded to six decimals: 241.316505 kPa (gauge, like the input).

Result: 241.316505 kPa

Assumptions and limits

Standard atmosphere = exactly 101,325 Pa. Gauge vs absolute pressure is not inferred.

Formula and worked examples last checked November 20, 2026. Spotted a problem? Report an error.

Frequently asked questions

How many psi is one bar?

One bar is about 14.503774 psi. One psi is about 0.068948 bar.

Is 1 bar equal to 1 atmosphere?

Close but not equal: 1 atm is 1.01325 bar. The difference is about 1.3%.

How do I convert psi to kPa in my head?

Multiply psi by about 6.9. For 30 psi that is about 207 kPa; the exact figure is 206.84 kPa.

What does psig mean?

Pounds per square inch gauge: pressure measured relative to the surrounding air. Psia means absolute pressure, which includes the atmosphere.

Sources