This converter rewrites any number as a coefficient between 1 and 10 multiplied by a power of ten. It helps with chemistry and physics homework, reading spreadsheet output, and comparing quantities that differ by many orders of magnitude.
How to use the Scientific Notation calculator
- Type the number into Number without thousands separators, for example 299792458 rather than 299,792,458.
- For very large or small values you can also type e-notation, such as 6.02e23 or 4.5e-4.
- Read the result as coefficient × 10^exponent, with the coefficient rounded to six decimal places.
How the scientific notation calculation works
Reading the coefficient and the exponent
The exponent counts how many places the decimal point moved. A positive exponent means the original number was 10 or larger; a negative exponent means its size was below 1. For 0.00045 the point moves four places right to give 4.5, so the exponent is −4.
The coefficient always keeps six decimal places, so 1.5e3 is shown as 1.500000 × 10^3. Those trailing zeros are a display convention, not a claim of measured precision. For significant figures, round the coefficient yourself based on your data.
Rounding edge cases and number entry
Because the coefficient is rounded, a value just below a power of ten can roll over. Entering 9.9999999 returns 1.000000 × 10^1, since 9.9999999 rounds to 10 at six decimals and the notation shifts to keep the coefficient below 10. Zero is shown as 0.000000 × 10^0.
The input is read as a standard floating-point number, so commas cause an error. Negative numbers keep their sign on the coefficient: −0.0032 becomes −3.200000 × 10^-3.
Connection to SI prefixes
SI prefixes are names for powers of ten, which makes scientific notation easy to translate into units. According to NIST, kilo means 10³, mega 10⁶ and giga 10⁹, while milli, micro and nano mean 10⁻³, 10⁻⁶ and 10⁻⁹. A reading of 4.5 × 10^-4 meters is therefore 0.45 millimeters, or 450 micrometers.
Worked examples
Number: 0.00045
- Move the decimal point right until one nonzero digit is in front of it: 0.00045 → 4.5.
- Count the moves: 4 places.
- Moving right means a negative exponent, so the exponent is −4.
- Result: 4.5 × 10^-4, displayed with six decimals as 4.500000 × 10^-4.
Result: 4.500000 × 10^-4
Number: 299792458
- NIST lists the speed of light in vacuum as exactly 299,792,458 m/s.
- Move the decimal point left 8 places: 2.99792458.
- Round the coefficient to six decimals: 2.997925 (the 5 in the seventh place rounds the 4 up).
- Result: 2.997925 × 10^8 m/s.
Result: 2.997925 × 10^8
Assumptions and limits
Finite IEEE-754 numbers; coefficient rounding is for display only. Zero is written 0.000000 × 10^0.
Formula and worked examples last checked November 20, 2026. Spotted a problem? Report an error.
Frequently asked questions
How do I write 0.000056 in scientific notation?
Move the decimal point five places right to get 5.6, so the result is 5.6 × 10^-5. Each place moved to the right lowers the exponent by one.
What does 1.2E+05 mean on a calculator or spreadsheet?
It is e-notation for 1.2 × 10^5, which equals 120,000. You can paste values like 1.2E+05 or 1.2e5 straight into this converter.
What is the difference between scientific and engineering notation?
Engineering notation restricts the exponent to multiples of three so it lines up with SI prefixes, allowing coefficients from 1 to 999. For example, 45,000 is 4.5 × 10^4 in scientific notation but 45 × 10^3 in engineering notation.
How do I multiply numbers in scientific notation?
Multiply the coefficients and add the exponents, then renormalize. (3 × 10^4) × (5 × 10^3) = 15 × 10^7, which becomes 1.5 × 10^8.