1. Home
  2. Salary & payroll
  3. Time Card Calculator
Salary & payroll

Time Card Calculator

Add up a week of shifts, subtract unpaid breaks, split regular and overtime hours and estimate gross pay.

Your numbers

h
×

Results update as you type. Nothing you enter is sent anywhere.

Result

39.5 hours · $869.00

Regular 39.5 h (39:30) × $22.00 + overtime 0 h (0:00) × $22.00 × 1.5. Overtime is counted on weekly hours over the threshold (the federal FLSA standard is 40 hours at 1.5×); daily-overtime state rules are not applied. Gross pay before taxes.

Formula used

Daily hours = end − start − unpaid break; overtime = weekly hours over the threshold; pay = regular h × rate + overtime h × rate × multiplier

This time card calculator adds up a week of shifts from start and end times, subtracts unpaid breaks, and splits the total into regular and overtime hours. With an hourly rate it also estimates gross pay. It is built for hourly workers checking a paycheck and for small employers filling in timesheets.

How to use the Time Card calculator

  1. In Shifts worked, type one entry per day: the day, the start and end time in 24-hour format, and the unpaid break in minutes, for example Mon 09:00-17:30 30. Separate days with semicolons.
  2. Leave out days you did not work; there is nothing to fill in for them. The break number is optional and counts as 0 if you leave it off.
  3. Enter your Hourly rate, or 0 if you only want hours.
  4. Check Overtime after (hours per week) and the Overtime multiplier. The defaults of 40 hours and 1.5 match the federal standard.
  5. Read total hours and gross pay, then use the table to check each day's hours in both decimal and hours:minutes form.

How the time card calculation works

FormulaDaily hours = end − start − unpaid break; overtime = weekly hours over the threshold; pay = regular h × rate + overtime h × rate × multiplier

Entering times correctly

Use 24-hour times so there is no confusion between morning and evening: 1:30 pm is 13:30 and midnight is 00:00. An end time earlier than the start time is read as the next morning, so a night shift entered as Fri 22:00-06:00 30 counts as 7.5 hours. Start and end cannot be identical, because the tool cannot tell whether that means zero hours or a full day.

The break field is for unpaid time only. Under the federal rules summarized in Department of Labor Fact Sheet #22, short rest breaks of about 5 to 20 minutes count as hours worked, while a bona fide meal period, typically 30 minutes or more with no duties, does not. So a paid 15-minute coffee break should not be subtracted.

Decimal hours versus hours and minutes

Payroll systems multiply your rate by decimal hours. Seven hours and 45 minutes is 7.75 hours, not 7.45. Mixing the two formats is one of the most common timesheet mistakes, and it underpays about a quarter of an hour on that day alone. The table shows both forms side by side so you can compare with your employer's records.

The calculator works in whole minutes and converts to decimal hours only when multiplying by the rate. Pay is rounded to the cent only in the displayed result, so a week of 23.25 hours at 21.50 shows as 499.88.

How overtime is counted

The Fair Labor Standards Act requires covered, nonexempt employees to receive at least one and a half times their regular rate for hours over 40 in a workweek. The calculator applies that weekly rule: hours up to the threshold are regular, and every hour beyond is overtime at your rate times the multiplier.

Some states add daily overtime or double time, and some union contracts or employers pay overtime sooner than the federal floor. Those rules are not applied automatically, but you can change the threshold or multiplier to match a weekly policy. If a week has daily overtime, split the hours yourself and use the Overtime Pay Calculator.

Worked examples

A 44-hour week with two long days

Shifts worked: day start-end break minutes, separated by semicolons: Mon 07:00-15:30 30; Tue 07:00-15:30 30; Wed 07:00-17:30 30; Thu 07:00-17:30 30; Fri 07:00-15:30 30 · Hourly rate: 24 · Overtime after (hours per week): 40 h · Overtime multiplier: 1.5 ×

  1. Mon, Tue and Fri: 15:30 − 07:00 = 8.5 hours, minus a 30-minute break = 8 hours each, 24 hours total.
  2. Wed and Thu: 17:30 − 07:00 = 10.5 hours, minus 30 minutes = 10 hours each, 20 hours total.
  3. Week = 24 + 20 = 44 hours: 40 regular and 4 overtime.
  4. Pay = 40 × 24 + 4 × 24 × 1.5 = 960 + 144 = 1,104.

Result: 44 hours · $1,104.00

Three overnight shifts

Shifts worked: day start-end break minutes, separated by semicolons: Thu 23:00-07:15 30; Fri 23:00-07:15 30; Sat 23:00-07:15 30 · Hourly rate: 21.50 · Overtime after (hours per week): 40 h · Overtime multiplier: 1.5 ×

  1. Each shift runs from 23:00 to 07:15 the next morning: 1 hour before midnight plus 7 hours 15 minutes after = 8 hours 15 minutes.
  2. Minus a 30-minute meal break = 7 hours 45 minutes = 7.75 hours per shift.
  3. Week = 3 × 7.75 = 23.25 hours, all regular.
  4. Pay = 23.25 × 21.50 = 499.875, shown as 499.88.

Result: 23.25 hours · $499.88

Assumptions and limits

Times in 24-hour format; an end time earlier than the start is treated as an overnight shift. Days you did not work are simply left out. Weekly overtime only; no daily or state-specific overtime rules.

Formula and worked examples last checked November 20, 2026. Spotted a problem? Report an error.

Frequently asked questions

How do I convert minutes to decimal hours for a time card?

Divide the minutes by 60. Fifteen minutes is 0.25 hours, 30 minutes is 0.5 and 45 minutes is 0.75, so 8 hours 20 minutes is 8.33 hours. The table in this calculator shows each day both ways.

Is a 30-minute lunch break paid?

Under federal law a bona fide meal period, usually 30 minutes or more, can be unpaid if you are fully relieved of duty. If you have to stay at your desk answering calls, it counts as work time. State laws may add their own meal-break rules.

Does overtime count per day or per week?

Federal law counts overtime by the workweek, a fixed and regularly recurring period of 168 hours. Working 10 hours one day and 6 the next does not create federal overtime if the week stays at or below 40 hours. A few states also require daily overtime.

How do I enter a shift that crosses midnight?

Type the real start and end times, for example Sat 22:00-06:30 30. Because the end time is earlier than the start, the calculator adds 24 hours to the end and marks it as the next day in the table.

Do paid holidays or sick hours count toward overtime?

Under the FLSA, overtime is based on hours actually worked, so paid time off for holidays, vacation or sickness does not have to be counted toward the 40 hours. Some employers count it anyway by policy. Leave those hours out of the shift list unless your employer includes them.

Can I use this for a two-week pay period?

Run each week separately. Federal overtime is figured week by week, so averaging 80 hours over two weeks can hide overtime: 45 hours one week and 35 the next still earns 5 overtime hours.

Sources