What body fat percentage is, and how you can estimate it
Body fat percentage is the share of your total weight that is fat: fat mass divided by body weight, times 100. You cannot weigh your fat directly, so every method estimates it from something else, such as body circumferences, skinfold thickness, electrical resistance or X-ray absorption.
At home, the most practical method is a circumference equation. The best known are the US Navy equations, developed in 1984 and checked against underwater weighing. Men need waist, neck and height; women also need hips. The Body Fat Calculator applies them, and you can also work them by hand with a calculator that has a log button.
Working the male formula by hand
The male equation, with all measurements in inches, is: body fat % = 86.010 × log10(waist − neck) − 70.041 × log10(height) + 36.76. Here log10 is the base-10 logarithm. If you measured in centimeters, divide each figure by 2.54 first.
Take a man who is 5 ft 10 in (70 in) with a 36 in waist measured at the navel and a 15.5 in neck. Subtract first, then take logarithms, then multiply, then add.
Working the female formula by hand
The female equation adds the hip measurement: body fat % = 163.205 × log10(waist + hip − neck) − 97.684 × log10(height) − 78.387, again in inches. In the Navy procedure, women measure the waist at its narrowest point and the hips at the widest part of the buttocks.
For a woman who is 5 ft 5 in (65 in) with a 30 in waist, 40 in hips and a 13 in neck, the circumference term is 57 in.
Turning the percentage into pounds
A percentage on its own can hide what changed. Multiply it by body weight to get fat mass, and subtract that from body weight to get everything else, often called lean or fat-free mass: muscle, bone, organs and water.
This split is useful when tracking change over time. If weight falls but the estimated fat mass stays the same, the loss came mostly from lean tissue or water; if weight is steady but estimated fat mass falls, composition is shifting even though the scale is not.
Why a half inch matters
Because the waist sits inside a logarithm with a large multiplier, small tape errors move the result noticeably. Measuring the same man’s waist at 36.5 in instead of 36 in raises the estimate from 20.35% to 21.25%, almost a full percentage point from half an inch.
Measure standing and relaxed, at the end of a normal breath out, with the tape level and snug but not compressing the skin. Take each reading twice and use the average. For tracking, measure at the same time of day under the same conditions; the trend over months is more meaningful than any one result.
Metric entries work the same way. A waist of 91.5 cm, neck of 39.5 cm and height of 178 cm give 20.27%, close to the inch example because the numbers are near-equivalents, not exact conversions.
How tape-measure results compare with scales and scans
Bioelectrical impedance, the method in most body-fat bathroom scales, passes a small current through the body. The 1994 NIH technology assessment statement explains that it estimates total body water, from which fat-free mass and fat are then calculated. The statement lists hydration, recent food and drink, recent exercise and body position among the factors that affect readings, which is why the same scale can give different numbers morning and evening.
The CDC describes dual-energy X-ray absorptiometry (DXA) as a method that precisely measures body composition, but notes it is costly and hard to access. Skinfold calipers and underwater weighing are other options, each with its own procedure and error.
Different methods can give different percentages for the same person on the same day. Compare results only within one method, measured the same way, rather than mixing a scale reading with a tape-measure estimate.
Body fat versus BMI and waist-to-height ratio
These three numbers answer different questions. BMI relates weight to height and, as the CDC notes, does not distinguish fat from muscle and bone. Waist-to-height ratio looks only at fat carried around the middle. The Navy estimate tries to give the overall fat share.
For the 185 lb, 5 ft 10 in man above, BMI is 26.5, in the CDC’s 25-to-under-30 range. His waist-to-height ratio is 0.514, just above the 0.5 point where NICE guidance describes increased central adiposity. His Navy estimate is about 20%. Seeing all three gives a fuller picture than any single figure.
There is no single official US cutoff for a healthy body fat percentage, and published charts vary by source, age and sex. Treat the result as information to track and discuss with a clinician, not as a diagnosis.
Common mistakes and which calculator to use
The usual errors are measuring the waist at the trouser line instead of the navel (men) or the narrowest point (women), pulling the tape tight, mixing inches and centimeters, and expecting lab-grade precision from a field equation. If the calculator reports an implausible result, check that the waist is larger than the neck and that each value is in the right box.
Use the Body Fat Calculator for the Navy estimate, the Waist-to-Height Ratio calculator for central fat, and the BMI Calculator for the standard weight-for-height screen. If a result concerns you, a clinician can assess it alongside blood pressure, blood tests and your history.
Sources and further reading
- Hodgdon JA, Beckett MB. Prediction of percent body fat for U.S. Navy men from body circumferences and height. NHRC Report 84-11
- Hodgdon JA, Beckett MB. Prediction of percent body fat for U.S. Navy women. NHRC Report 84-29
- CDC: About Body Mass Index (BMI)
- NIH Technology Assessment Conference Statement: Bioelectrical impedance analysis in body composition measurement (1994)
- NICE guideline NG246: Identifying and assessing overweight, obesity and central adiposity