This calculator estimates body fat percentage from tape-measure readings using the circumference equations developed for the US Navy in 1984. It needs your waist, neck and height, plus hips for the female equation.
How to use the Body Fat calculator
- Select your measuring system in Units, so the tape readings go into the right boxes.
- Enter Waist, Neck and Height. Enter Hip too; the box is required, but its value only affects the female equation.
- Pick male or female in Equation coefficient.
- Read the estimated body fat percentage.
How the body fat calculation works
How the Navy equations work
The male equation uses waist minus neck; the female equation uses waist plus hip minus neck. Both use the logarithm of that circumference figure and of height, in inches, which is why metric entries are divided by 2.54 first.
The equations were developed from measurements of Navy personnel and checked against underwater weighing. They were built to screen large numbers of people quickly, not to give a lab-grade reading for one person, so expect a margin of several percentage points.
Taking measurements that repeat
Measure at the same time of day, standing relaxed. Navy procedure measures the neck just below the larynx, men's waist at the navel, women's waist at the narrowest point, and women's hips at the widest point of the buttocks. Keep the tape flat and level.
A centimeter of error in the waist changes the result noticeably, so take each reading twice. For tracking progress, the trend over months matters more than any single reading. A DEXA scan gives a more precise measurement if you need one.
Worked example
Units: Metric (kg, cm) · Waist: 76 cm · Neck: 33 cm · Hip (female formula only): 98 cm · Height: 165 cm · Equation coefficient: female
- Circumference: 76 + 98 − 33 = 141 cm ÷ 2.54 = 55.512 in; log10 = 1.74439.
- Height: 165 ÷ 2.54 = 64.961 in; log10 = 1.81265.
- 163.205 × 1.74439 = 284.692; 97.684 × 1.81265 = 177.067.
- 284.692 − 177.067 − 78.387 = 29.24%.
Result: 29.238494 %
Assumptions and limits
Adult screening/fitness estimate, not a diagnosis, treatment plan or medical advice. Individual needs vary; consult a clinician. US Navy circumference equation; centimeter inputs are converted to inches internally. Hip is required but only used for the female coefficient. Measure consistently; no age or ethnicity adjustment.
Formula and worked examples last checked November 20, 2026. Spotted a problem? Report an error.
Frequently asked questions
What is a healthy body fat percentage?
There is no single official US cutoff for body fat percentage, and published charts differ by source, age and sex. Women naturally carry more essential fat than men. Ask a clinician to interpret your result alongside other health measures.
Why does the male formula not use my hip measurement?
The male Navy equation was built from waist, neck and height only. The tool still asks for hip so the form works for both equations, but the value does not change a male result.
How accurate is the Navy body fat method?
It is a field estimate. Compared with reference methods, individual results can be off by several percentage points, mainly because fat distribution varies. Consistent measuring technique makes it more useful for tracking change.
Why do I get an error saying the percentage is implausible?
The tool rejects results below 0% or above 100%, which usually means a measurement was typed in the wrong box or unit. Check that the waist is larger than the neck and that height is in centimeters, or in feet and inches for US units.