Percentage change tells you how far a value has moved relative to where it started: a stock price, a utility bill, website traffic, or a test score from one term to the next. Enter the original and the new value; a positive answer is an increase and a negative answer is a decrease. The calculator also shows the absolute change, so you can see both the size of the move and its scale.
How to use the Percentage Change calculator
- Enter the earlier, reference figure in Original value. It must be greater than zero.
- Enter the later figure in New value. It can be zero or negative, for example profit turning into a loss.
- Read the percentage result. A minus sign means the value fell.
- Check the absolute change shown under the result before quoting the percentage, especially when the starting figure is small.
How the percentage change calculation works
The starting value decides everything
The formula divides by the original value, so which number you call ‘original’ changes the answer. A move from 80 to 100 is a 25% increase, while a move from 100 to 80 is a 20% decrease. Both describe the same 20-unit gap, measured against different bases. Always put the earlier or reference value first.
For two numbers with no natural ‘before’ and ‘after’, such as the prices of the same product at two stores, a direction-free measure is more honest. The Percentage Difference Calculator divides by the average of the two values and gives one answer regardless of order.
Small bases produce dramatic percentages
Going from 2 complaints to 6 complaints is a 200% increase, which sounds alarming but is only four extra complaints. When the original is small, a tiny absolute change becomes a huge percentage. Report the counts alongside the percentage, and be cautious comparing percentage changes between groups of very different sizes.
A zero original is not allowed at all, because the change would mean dividing by zero. If a product had no sales last month and 40 this month, the percentage change is undefined; describe the change in units instead.
Negative results and values that cross zero
Any decrease from a positive start falls between 0% and −100% as long as the new value stays positive. A result of exactly −100% means the value dropped to zero. Results below −100% happen when the new value is negative: a profit of $50 becoming a loss of $10 is a −120% change.
Percentages that cross zero are mathematically correct but easy to misread, so many analysts describe such moves in words, such as ‘swung from a $50 profit to a $10 loss’. The calculator requires a positive original because a negative baseline makes the sign of the percentage misleading.
Worked examples
Original value: 3.29 · New value: 3.89
- Absolute change: 3.89 − 3.29 = 0.60.
- Divide by the original: 0.60 ÷ 3.29 = 0.18237082…
- Multiply by 100: about 18.237082%. Rounded, the price rose about 18.2%.
Result: 18.237082%
Original value: 250 · New value: 190
- Absolute change: 190 − 250 = −60 units.
- Divide by the original: −60 ÷ 250 = −0.24.
- Multiply by 100: −24%, a 24% decrease.
- To return to 250 from 190 would take a 60 ÷ 190 ≈ 31.6% increase, because the base is now smaller.
Result: -24%
Assumptions and limits
Original value must be positive. New values may be negative. This is not symmetric percentage difference.
Formula and worked examples last checked November 20, 2026. Spotted a problem? Report an error.
Frequently asked questions
What is the formula for percentage change?
Percentage change = (new − original) ÷ original × 100. From 40 to 46, that is 6 ÷ 40 × 100 = 15%. Divide by the original, never by the new value.
Is percentage change the same as percentage difference?
No. Percentage change measures a move from a starting point and depends on direction. Percentage difference compares two values symmetrically using their average, so 80 and 100 differ by about 22.2% whichever comes first, while the change from 80 to 100 is 25%.
Can percentage change be more than 100%?
Yes, for increases. A value that triples from 30 to 90 has changed by 200%. Decreases are limited to −100% unless the new value goes below zero.
How do I calculate the percentage change when the original value is zero?
You can't; dividing by zero is undefined, so the calculator rejects it. Report the absolute change instead, such as ‘rose from 0 to 40 units’.
How do I average percentage changes over several years?
Don't add yearly percentages and divide. A +50% year followed by a −50% year leaves you at 75% of the start, a 25% loss, even though the simple average is 0%. Compare the first and last values directly, or use a compound annual growth rate for a per-year figure.