1. Home
  2. Guides
  3. Estimate appliance electricity cost from watts and kilowatt-hours
Home & DIY

Estimate appliance electricity cost from watts and kilowatt-hours

Convert power into energy, match your usage estimate to a per-kWh tariff, and recognize why a device’s rated wattage may not describe its real bill.

Illustration of a lamp, electric kettle, plug, calculator and coins, representing appliance electricity costs.

Watts describe power; kilowatt-hours describe energy

A watt is a unit of power, while a kilowatt-hour is a unit of energy. A device drawing one thousand watts for one hour uses one kilowatt-hour. Convert watts to kilowatts by dividing by one thousand, then multiply by operating hours to estimate the energy consumed.

Confusing the units can make an estimate wrong by a factor of one thousand. A bill’s price per kilowatt-hour should be applied to energy, not directly to watts. Read both the device specification and the tariff carefully, since a power rating and an energy label describe different quantities.

Estimate the time actually spent drawing that power

Calculator Simply assumes the entered power remains constant during the supplied hours of use. This can be reasonable for a simplified scenario, but appliances with thermostats, cycling motors or variable operating modes do not necessarily draw their rated maximum continuously. Hours plugged in are not always hours at full power.

Use an appropriate average power figure or measured energy consumption when available. Account for standby separately if it matters. Do not treat a nameplate maximum as a measured average merely because it is easy to find. The calculator cannot infer a refrigerator’s duty cycle or a heater’s actual operating pattern.

Worked exampleA constant 1,000 W device used 2 hours each day for 30 days consumes 1 kW × 2 × 30 = 60 kWh.

Use the tariff’s energy price and state excluded charges

Multiply the energy estimate by a manually entered price per kilowatt-hour. Check whether the price is quoted in whole currency units or cents: twenty cents is 0.20 dollars, not twenty dollars. Keep currency consistent across devices and do not assume choosing a display currency performs an exchange-rate conversion.

The tool models a flat energy tariff and excludes fixed charges, demand charges, tiered rates and taxes. Time-of-use pricing can require separate calculations for different periods. If a bill includes several components, distinguish the device’s incremental energy estimate from the entire household bill rather than comparing unlike totals.

Worked example60 kWh × $0.20/kWh = $12 in energy charges under the flat-rate scenario, before any excluded charges or taxes.

Find the right price per kilowatt-hour on your bill

A bill often lists several lines: a fixed monthly charge, an energy charge per kWh, and sometimes delivery or other per-kWh charges. For estimating one device, add up the charges that rise with each extra kWh and ignore the fixed monthly fee, which you pay regardless.

If you cannot separate the lines, dividing the total energy charges by the kWh used gives an average price. It is less precise for tiered or time-of-use tariffs, but much better than a guess. Note the rate and bill date beside the estimate.

Worked examplePer-kWh charges of $0.12 for supply and $0.06 for delivery give a working rate of $0.18/kWh for the incremental cost of a device.

Three worked examples

A space heater rated at 1,500 W running 4 hours a day over a 90-day winter is a useful upper bound. A heater with a thermostat cycles off once the room warms up, so its real use is often lower than this constant-draw figure.

Small loads that never switch off add up. A device drawing 10 W around the clock uses 87.6 kWh in a year. Lighting comparisons show why energy, not purchase price alone, matters: OpenStax works through the same kind of 60 W versus 15 W bulb comparison at a different tariff.

Worked exampleHeater: 1.5 kW × 4 h × 90 days = 540 kWh × $0.18 = $97.20. Standby: 0.01 kW × 24 h × 365 days = 87.6 kWh × $0.18 ≈ $15.77 a year. Bulbs over 1,000 hours: 60 W uses 60 kWh ($10.80) and 15 W uses 15 kWh ($2.70).

Turn a plug-in meter reading into an average power

A plug-in energy meter records the kilowatt-hours a device actually uses, including the time a thermostat or compressor is switched off. Leave it connected for several days of normal use, then divide the reading by the number of days to get an average daily figure.

To use that figure in the electricity-cost calculator, convert it to an average power: divide the daily kilowatt-hours by 24 hours and multiply by 1,000 to get watts, then enter 24 hours per day. This replaces a guess about duty cycle with a measurement, and it is usually far below the nameplate rating for a cycling appliance.

Worked exampleA meter shows 3.6 kWh after 3 days: 3.6 ÷ 3 = 1.2 kWh per day, or 1.2 ÷ 24 × 1,000 = 50 W on average. Over a year: 50 W × 24 h × 365 days = 438 kWh, which at $0.18/kWh is about $78.84.

Rescale an EnergyGuide label to your own rate

In the US, many major appliances, including refrigerators, clothes washers, dishwashers, water heaters and televisions, carry an EnergyGuide label. The FTC explains that its yearly cost estimate is based on typical use and a national average energy price, so your own cost will differ with your usage and local rate.

For a cycling appliance such as a refrigerator, the label’s yearly energy use is usually a better starting point than multiplying the nameplate watts by 24 hours. Multiply that energy figure by your own rate to get a local estimate.

Worked exampleA label showing 400 kWh per year (an illustrative figure) at a local rate of $0.18/kWh gives 400 × 0.18 = $72 per year.

Compare alternatives under the same assumptions

To compare two devices, use the same period, task and tariff, and an appropriate consumption figure for each. A lower wattage does not always imply lower energy per completed task if the device takes longer. To see how much a rate rise changes a cost, the percentage-change calculator compares the old and new figures: a move from $0.16 to $0.18/kWh is a 12.5% increase.

Record the power, hours, days and rate beside every result, then test how a change in usage affects the estimate. Never open or modify electrical equipment to obtain a measurement. Follow product guidance and use suitable equipment or qualified assistance where necessary; a cost calculation is not an electrical safety assessment.

Sources and further reading

Try the calculators