Use this converter to write a number from 1 to 3,999 in Roman numerals, or to read a Roman numeral back as an ordinary number. It shows how the numeral splits into thousands, hundreds, tens and ones, and it tells you when a numeral is not written in standard form, along with the form you probably meant.
How to use the Roman Numeral calculator
- Under Conversion, choose Number to Roman or Roman to number.
- Type into Number or Roman numeral. Numbers take digits only (1994 or 1,994). Numerals can be upper or lower case but must not contain spaces.
- Read the result and the breakdown in the detail line, for example 1,994 = M + CM + XC + IV.
- If you get an error for a numeral, read the suggestion: it gives the standard spelling of the value the letters seem to represent.
How the roman numeral calculation works
The seven symbols and the subtractive rule
Roman numerals use seven letters: I = 1, V = 5, X = 10, L = 50, C = 100, D = 500 and M = 1,000. Symbols are written from largest to smallest and added together, so MDCLXVI is 1,000 + 500 + 100 + 50 + 10 + 5 + 1 = 1,666.
To keep numerals short, a smaller symbol written before a larger one is subtracted. Only six such pairs are standard: IV (4), IX (9), XL (40), XC (90), CD (400) and CM (900). Each pair uses I, X or C in front of the next two larger symbols. That is why 99 is XCIX (90 + 9), not IC, and why 45 is XLV rather than VL.
A symbol may repeat up to three times in a row (III, XXX, CCC, MMM). V, L and D never repeat, because VV would just be X, LL would be C and DD would be M.
How the converter builds a numeral
The calculator treats each decimal digit separately. For the ones place it uses I, V and X; for tens, X, L and C; for hundreds, C, D and M; and for thousands, M alone. A digit of 4 becomes the one-five pair (IV, XL, CD), 9 becomes the one-ten pair (IX, XC, CM), and the others are built by adding. Joining the pieces gives the numeral, and the same pieces appear in the breakdown.
Reading a numeral works in reverse, with a check. The converter first works out the value the letters suggest, then rebuilds the standard numeral for that value. If the two spellings differ, your input was non-standard and you get an error rather than a guess presented as fact. IIII, VX, IIX and IC are all caught this way.
Why the range stops at 3,999
The largest symbol is M, and the repeat limit allows at most MMM. That makes MMMCMXCIX, 3,999, the biggest value standard notation can express, which is why the converter rejects 4,000 and MMMM. There is also no Roman numeral for zero, so 0 is rejected too.
Where you will meet Roman numerals today: clock faces, chapter and volume numbers, the names of monarchs and popes, outline headings, and copyright years at the end of films and TV programs. Many clock faces show four as IIII for decorative reasons. That is a design convention, not standard notation, and the converter reports it as such.
Worked examples
Conversion: Number to Roman · Number or Roman numeral: 1994
- Split by place value: 1,000 + 900 + 90 + 4.
- 1,000 = M; 900 = CM (100 before 1,000); 90 = XC (10 before 100); 4 = IV (1 before 5).
- Join the pieces in order: M + CM + XC + IV = MCMXCIV.
Result: MCMXCIV
Conversion: Roman to number · Number or Roman numeral: MMXXVI
- No smaller letter comes before a larger one, so every symbol is added.
- MM = 2,000; XX = 20; VI = 5 + 1 = 6.
- 2,000 + 20 + 6 = 2,026. Rebuilding 2,026 gives MMXXVI again, so the numeral is standard.
Result: 2,026
Assumptions and limits
Standard modern subtractive notation from 1 to 3,999. No symbol exists for zero. Non-standard forms such as IIII, VX, IC or MMMM are rejected, with the standard form suggested where one exists.
Formula and worked examples last checked November 20, 2026. Spotted a problem? Report an error.
Frequently asked questions
What is 4 in Roman numerals, IV or IIII?
In standard notation 4 is IV, five minus one. IIII appears on many clock faces as a decorative choice, but it breaks the three-repeat rule, so this converter rejects it and suggests IV.
Why is 99 written XCIX and not IC?
I can only be subtracted from V and X, the next two larger symbols. So 99 has to be split into 90 (XC) and 9 (IX), giving XCIX. The same rule turns 49 into XLIX rather than IL.
How do you write 2026 in Roman numerals?
2026 is MMXXVI: MM for 2,000, XX for 20 and VI for 6. There is no hundreds part, so no C or D appears. 2025 is MMXXV and 2027 is MMXXVII.
Is there a Roman numeral for zero?
No. The Roman system has no symbol for zero, and the place-value idea that needs a zero is not part of it. The converter accepts 1 to 3,999 and explains why 0 has no answer.
What is the largest number you can write in Roman numerals?
With the seven standard symbols and the rule that a letter repeats at most three times, the largest is MMMCMXCIX, which equals 3,999. Larger values need extra marks that are outside the standard notation this converter uses.
Can I type Roman numerals in lower case?
Yes. mcmxciv is read exactly like MCMXCIV, and the result shows the numeral in capitals. Spaces and other letters are rejected, so type the numeral as one unbroken word.