This estimator multiplies a flow rate by minutes of use per day and by a number of days to show how many liters a shower, tap or hose uses over a period.
How to use the Water Usage calculator
- Enter the Flow rate in L/min. To measure it, time how long the fixture takes to fill a bucket of known size.
- Enter Use per day in minutes and the number of Days.
- Read the total in liters.
How the water usage calculation works
Finding your flow rate
Hold a bucket marked in liters under the tap or shower for 10 seconds, read the volume, and multiply by 6 to get liters per minute. Many fixtures also print a maximum flow on the product or packaging, often in US gallons per minute (gpm). Multiply gpm by 3.785 to get L/min.
The EPA lists 2.5 gpm (about 9.5 L/min) for a standard showerhead and a maximum of 2.0 gpm (about 7.6 L/min) for showerheads with its WaterSense label. The EPA estimates that showering makes up nearly 17% of residential indoor water use.
Using the result
Run the calculation twice, once with your current flow or minutes and once with the change you are considering, to see the difference in liters. Cutting a daily shower from 10 to 8 minutes at 9.5 L/min saves 19 liters a day.
The tool does not estimate a bill. Water charges vary by utility and often include fixed fees and sewer charges. Hot water also costs energy to heat, which this calculator does not include. To convert liters to US gallons, divide by 3.785.
Worked example
Flow rate: 7.6 L/min · Use per day: 8 minutes · Days: 30
- Per shower: 7.6 × 8 = 60.8 liters.
- Over 30 days: 60.8 × 30 = 1,824 liters.
- In US gallons: 1,824 ÷ 3.785 = about 482 gallons.
Result: 1,824 L
Assumptions and limits
Constant measured/manual flow. Does not estimate a water bill, leaks or pressure changes.
Formula and worked examples last checked November 20, 2026. Spotted a problem? Report an error.
Frequently asked questions
How many liters does a 10-minute shower use?
At the 2.5 gpm (about 9.5 L/min) flow of a standard showerhead, about 95 liters. With a 2.0 gpm WaterSense head (about 7.6 L/min) it is about 76 liters.
How do I convert gallons per minute to liters per minute?
Multiply by 3.785, the number of liters in a US gallon. 1.8 gpm is about 6.8 L/min.
How much water does a WaterSense showerhead save?
The EPA estimates an average family could save about 2,700 gallons a year by switching to WaterSense-labeled showerheads. Your saving depends on your current flow and how long you shower.
Can I use this for a garden hose or irrigation?
Yes, if you measure the flow at the pressure you actually use. Time how long the hose takes to fill a bucket, convert to L/min, then enter the minutes per day you water.