This calculator estimates what it costs to run an appliance from its wattage, how many hours a day it runs, the number of days, and your electricity rate per kWh.
How to use the Electricity Cost calculator
- Enter the appliance's power in Device power (W). Check the label on the back or underneath, or the manual.
- Enter Usage per day in hours (up to 24) and the number of Days.
- Enter your price per kWh from your bill in Manual energy tariff per kWh, and pick a currency symbol.
- Read the estimated cost, rounded to two decimals.
How the electricity cost calculation works
From watts to a bill amount
The U.S. Department of Energy method is to multiply watts by hours used per day and divide by 1,000 to get kilowatt-hours per day. This tool does that, multiplies by the number of days, and then by your price per kWh.
To find your rate, divide the energy charge on your bill by the kWh used. Use the all-in figure, including delivery charges billed per kWh, if you want a closer match to what you pay.
Why the estimate can be off
The label wattage is often a maximum. Appliances that cycle, such as refrigerators, freezers and heat pumps, draw full power only part of the time, so using the label figure for 24 hours overstates their cost. A plug-in power meter measures real consumption.
The tool assumes a flat rate. If your utility uses tiered pricing, time-of-use rates or demand charges, the real cost depends on when and how much you use. Standby power from devices left plugged in is also not included unless you enter it as a separate calculation.
Worked example
Device power: 1500 W · Usage per day: 5 hours · Days: 30 · Manual energy tariff per kWh: 0.17
- Daily energy: 1,500 × 5 ÷ 1,000 = 7.5 kWh.
- Over 30 days: 7.5 × 30 = 225 kWh.
- Cost: 225 × 0.17 = 38.25.
Result: $38.25
Assumptions and limits
Manual flat tariff; constant draw. Standby, demand charges, tiered rates and taxes excluded.
Formula and worked examples last checked November 20, 2026. Spotted a problem? Report an error.
Frequently asked questions
How much does it cost to run a 1,500 watt heater for an hour?
A 1,500 W heater uses 1.5 kWh in an hour on full power. At 15 cents per kWh that is 22.5 cents an hour; at 25 cents it is 37.5 cents. If it has a thermostat, it will cycle and use less.
How do I find the wattage if the label shows amps?
Multiply amps by volts. A device rated at 2 A on a 120 V US circuit draws up to 240 W. This gives the maximum, not typical use.
What is a kilowatt-hour?
One kilowatt-hour is the energy used by a 1,000-watt device running for one hour, or a 100-watt device running for 10 hours. Utilities bill electricity in kWh.
Does leaving things on standby cost much?
Each device uses only a few watts on standby, but the hours add up because it is drawing power all day. A device using 5 W on standby for 24 hours uses 0.12 kWh a day, about 43.8 kWh a year. Enter the standby wattage with 24 hours to price it.