1. Home
  2. Geometry
  3. Circle Area Calculator
Geometry

Circle Area Calculator

Calculate a circle’s area, circumference and diameter from its radius.

Your numbers

units

Results update as you type. Nothing you enter is sent anywhere.

Result

12.566371 square units

Circumference 12.566371 units · diameter 4 units.

Formula used

Area = πr²; circumference = 2πr

Enter a radius and this calculator gives the area of the circle, plus its circumference and diameter in the detail line. It suits garden beds, round tables, pizza comparisons, pipe cross-sections and geometry homework. The area is reported in square units of whatever length you used.

How to use the Circle Area calculator

  1. Measure across the circle through its center to get the diameter, then halve it to get the radius.
  2. Enter that value in Radius. Zero is allowed; negative values are rejected.
  3. Read the area in square units, rounded to six decimal places.
  4. Check the detail line for the circumference (the distance around) and the diameter.

How the circle area calculation works

FormulaArea = πr²; circumference = 2πr

Radius, diameter and the most common mistake

The single biggest error is entering the diameter where the radius belongs. Because area grows with the square of the radius, that mistake makes the answer four times too large. A 12-inch pizza has a 6-inch radius, not a 12-inch one.

If you can only measure the distance around, divide the circumference by 2π to recover the radius. A tree trunk with a 94-inch girth has a radius of about 94 ÷ 6.2832 ≈ 14.96 inches. The calculator uses the full double-precision value of π, which begins 3.14159265358979.

Why doubling the size quadruples the area

Area = πr² means the radius is squared, so scaling a circle by a factor multiplies its area by that factor squared. A 16-inch pizza has 8² ÷ 6² = 64 ÷ 36 ≈ 1.78 times the area of a 12-inch pizza, even though it is only a third wider.

This is also why square units matter. A radius in feet gives an area in square feet, and converting to square inches means multiplying by 144, not 12. For materials sold by volume, such as mulch or concrete, multiply the area by the depth in the same unit, or use the Cylinder Volume Calculator, which does that step for you.

Worked example

A round patio with a 6-foot radius

Radius: 6 units

  1. Square the radius: 6² = 36.
  2. Multiply by π: 36 × 3.14159265… = 113.0973…
  3. Area ≈ 113.097336 square feet.
  4. Circumference = 2 × π × 6 ≈ 37.699112 feet, the length of edging you would need.

Result: 113.097336 square units

Assumptions and limits

Euclidean circle. Radius may be zero; area units are the square of the input length unit.

Formula and worked examples last checked November 20, 2026. Spotted a problem? Report an error.

Frequently asked questions

How do I find the area of a circle from its diameter?

Halve the diameter to get the radius, then apply πr². Equivalently, area = π × d² ÷ 4. A 10-inch circle has an area of π × 100 ÷ 4 ≈ 78.54 square inches.

How many square feet is a 20-foot round pool?

A 20-foot diameter means a 10-foot radius, so the area is π × 10² ≈ 314.16 square feet. That is the water surface; the volume also depends on depth.

Is 3.14 accurate enough for π?

For rough estimates, yes. Using 3.14 instead of the full value understates the area by about 0.05%, so on a 113-square-foot patio the difference is under a tenth of a square foot.

What is the area of a semicircle?

Calculate the full circle and divide by two. A semicircle with a 6-foot radius covers about 113.1 ÷ 2 ≈ 56.55 square feet.

Sources