1. Home
  2. Geometry
  3. Rectangle Area Calculator
Geometry

Rectangle Area Calculator

Find area and perimeter from a rectangle’s length and width.

Your numbers

units
units

Results update as you type. Nothing you enter is sent anywhere.

Result

15 square units

Perimeter 16 units.

Formula used

Area = length × width; perimeter = 2(length + width)

This calculator multiplies length by width to give the area of a rectangle, and shows the perimeter in the detail line. It handles room flooring, wall paint, lawn seeding, and any homework problem with a four-sided shape whose corners are all right angles.

How to use the Rectangle Area calculator

  1. Measure the longer side and enter it in Length.
  2. Measure the shorter side and enter it in Width, using the same unit as Length.
  3. Read the area in square units and the perimeter in the detail line.

How the rectangle area calculation works

FormulaArea = length × width; perimeter = 2(length + width)

Area for materials, perimeter for edges

Area tells you how much surface to cover, which is what flooring, sod, paint and fabric are priced by. Perimeter tells you the length around the edge, which is what baseboard, fencing, trim and edging are sold by. Mixing the two up is common when you are ordering supplies.

Most rooms are not perfect rectangles. Split an L-shaped room into two rectangles, calculate each one separately, and add the areas. For flooring, add a waste allowance on top for cuts; the installation instructions for the product usually state how much.

Keeping the units straight

Both sides must be in one unit. A room 12 feet 6 inches long should be entered as 12.5 feet, not 12.6, because 6 inches is half a foot. Area comes out in square units, so feet in gives square feet out.

Converting square units uses the square of the linear factor. One square yard is 3 × 3 = 9 square feet, and one square foot is 12 × 12 = 144 square inches. Zero is accepted for either side and simply returns zero area.

Worked example

Flooring for a 14 by 11.5 foot bedroom

Length: 14 units · Width: 11.5 units

  1. Area = length × width = 14 × 11.5 = 161 square feet.
  2. Perimeter = 2 × (14 + 11.5) = 2 × 25.5 = 51 feet of baseboard, before subtracting doorways.
  3. Divide by 9 to convert to square yards: 161 ÷ 9 ≈ 17.9 square yards.

Result: 161 square units

Assumptions and limits

Matching input units; zero dimensions are accepted as degenerate rectangles.

Formula and worked examples last checked November 20, 2026. Spotted a problem? Report an error.

Frequently asked questions

How do I calculate square footage of a room?

Multiply the length in feet by the width in feet. A 12 × 15 foot room is 180 square feet. Convert inches to decimal feet first by dividing by 12.

What is the area of a square?

Enter the same number for length and width. A square with 9-inch sides has an area of 81 square inches and a perimeter of 36 inches.

How do I find the width if I know the area?

Divide the area by the known side. A 200-square-foot patio that is 16 feet long must be 200 ÷ 16 = 12.5 feet wide.

How much paint do I need for a wall?

Multiply the wall's width by its height, subtract windows and doors, and multiply by the number of coats. Divide by the coverage printed on the paint can, which varies by product and surface.