1. Home
  2. Geometry
  3. Cylinder Volume Calculator
Geometry

Cylinder Volume Calculator

Find the volume and total surface area of a closed right circular cylinder.

Your numbers

units
units

Results update as you type. Nothing you enter is sent anywhere.

Result

37.699112 cubic units

Total surface area (including both ends) 62.831853 square units.

Formula used

Volume = πr²h; total surface area = 2πr(r + h)

This calculator finds the volume of a closed, straight cylinder from its radius and height, and reports the total surface area including both ends. Use it for tanks, pipes, cans, round planters and concrete column forms. The result is in cubic units of the length you entered.

How to use the Cylinder Volume calculator

  1. Measure the diameter of the circular end and halve it to get the radius.
  2. Enter that value in Radius and the cylinder's length or depth in Height, in the same unit.
  3. Read the volume in cubic units.
  4. Use the surface area in the detail line for paint, insulation or label calculations; it includes the top and bottom.

How the cylinder volume calculation works

FormulaVolume = πr²h; total surface area = 2πr(r + h)

From cubic units to gallons and liters

The volume comes back in cubic versions of your input unit, which usually needs one more conversion. A US gallon is defined as exactly 231 cubic inches, so a cubic foot (1,728 cubic inches) holds 1,728 ÷ 231 ≈ 7.48 gallons. In metric, 1,000 cubic centimeters make one liter, and a cubic meter is 1,000 liters.

That means it pays to measure in the unit that converts easily. Measuring a tank in inches and dividing by 231 gives gallons directly. Measuring in centimeters and dividing by 1,000 gives liters.

Measuring real containers

The formula assumes a perfect right circular cylinder. For a tank or pipe, measure the inside diameter if you want capacity and the outside diameter if you want the space it occupies, because wall thickness can make a noticeable difference on small items.

For a partly full vertical tank, enter the liquid depth as the height to get the volume of liquid. A horizontal tank lying on its side does not work that way, since the liquid cross-section is not a full circle. The surface area figure assumes a closed cylinder, so subtract one end (πr²) for an open-top container.

Worked example

A water tank 3 feet across and 4 feet tall

Radius: 1.5 units · Height: 4 units

  1. Radius = 3 ÷ 2 = 1.5 feet.
  2. Area of the base = π × 1.5² = π × 2.25 ≈ 7.0686 square feet.
  3. Volume = base area × height = 7.0686 × 4 ≈ 28.274334 cubic feet.
  4. In gallons: 28.274334 × 1,728 ÷ 231 ≈ 211.5 US gallons.

Result: 28.274334 cubic units

Assumptions and limits

Straight cylinder with matching length units. Zero dimensions are accepted as limiting cases.

Formula and worked examples last checked November 20, 2026. Spotted a problem? Report an error.

Frequently asked questions

How do I calculate the volume of a cylinder in gallons?

Measure the radius and height in inches, calculate πr²h, and divide by 231. A can 6 inches across and 10 inches tall holds π × 9 × 10 ≈ 282.7 cubic inches, or about 1.22 gallons.

How much concrete fills a round column form?

Calculate the volume in feet and divide by 27 to get cubic yards. A form 12 inches across and 8 feet tall holds π × 0.5² × 8 ≈ 6.28 cubic feet, or about 0.23 cubic yards, before any allowance for spillage.

What is the difference between volume and surface area?

Volume is the space inside, in cubic units. Surface area is the total outside skin, in square units: 2πr² for the two ends plus 2πrh for the curved side.

Does the formula work for a slanted cylinder?

Yes, as long as height means the perpendicular distance between the two ends, not the length of the slanted side. The surface area shown here only applies to a straight cylinder, however.

Sources