Frequency counts how many complete cycles happen each second. Enter a whole number of cycles and the time they took, and this calculator returns hertz. It works for pendulums, heartbeats, rotating shafts, flashing lights and sound sources.
How to use the Frequency calculator
- Count complete cycles and enter the total in Cycles. It must be a whole number.
- Enter Elapsed time in seconds. It must be greater than zero.
- Read frequency in hertz. Multiply by 60 for cycles per minute.
How the frequency calculation works
Counting cycles accurately
One cycle is a full return to the starting state: a pendulum swinging out and back, or a wheel making one turn. Counting each side-to-side swing of a pendulum as a cycle would double the frequency.
Counting many cycles over a longer time reduces timing error. If your stopwatch reaction is about a fifth of a second, timing 50 swings instead of 5 makes that error ten times smaller relative to the total.
The Cycles field accepts only whole numbers. If you need partial cycles, count over a longer interval until you reach a whole number.
Frequency, period and wavelength
The period is the time for one cycle, the reciprocal of frequency. A 0.5 Hz pendulum has a 2 s period. The SI defines the hertz as one per second.
If the cycles belong to a traveling wave, the Wave Speed Calculator links frequency to wavelength and propagation speed.
Worked example
Cycles: 25 · Elapsed time: 50 s
- Frequency = cycles ÷ time
- f = 25 ÷ 50 = 0.5 Hz
- Period = 1 ÷ 0.5 = 2 s per swing
Result: 0.5 Hz
Assumptions and limits
SI units; idealized classical equation. Not a safety assessment or certified engineering design.
Formula and worked examples last checked November 20, 2026. Spotted a problem? Report an error.
Frequently asked questions
How do I convert RPM to hertz?
Divide revolutions per minute by 60. A shaft at 1,800 RPM turns 30 times a second, which is 30 Hz.
What is the relationship between frequency and period?
They are reciprocals: period = 1 ÷ frequency. A 50 Hz signal repeats every 0.02 s, and a 2 s period means 0.5 Hz.
How do I convert beats per minute to Hz?
Divide by 60. A resting heart rate of 72 beats per minute is 1.2 Hz. Enter 72 cycles and 60 seconds to get the same result here.
Why can't I enter 12.5 cycles?
The field is set to whole numbers so that each entry represents complete cycles. Time a longer stretch, for example 25 cycles instead of 12.5, and the frequency comes out the same.