1. Home
  2. Science & engineering
  3. Power Calculator
Science & engineering

Power Calculator

Find average mechanical power from work and elapsed time.

Your numbers

J
s

Results update as you type. Nothing you enter is sent anywhere.

Result

20 W

Power = work ÷ time. SI units; idealized classical equation. Not a safety assessment or certified engineering design.

Formula used

Power = work ÷ time

Power is the rate at which work is done or energy is transferred. Give this calculator an amount of energy in joules and the seconds it took, and it returns average power in watts. Use it for lifting, pumping or any task where you know the energy and the duration.

How to use the Power calculator

  1. Enter the energy or work in Signed work/energy, in joules. For lifting, that is mass × 9.80665 × height.
  2. Enter the duration in Elapsed time, in seconds. Convert minutes by multiplying by 60.
  3. Read average power in watts. A negative input gives negative power, meaning energy flowed out rather than in.

How the power calculation works

FormulaPower = work ÷ time

Average versus peak

The result is an average over the whole interval. A weightlifter who moves a bar in 0.8 s may hit far higher power in the middle of the lift than the average suggests. If you need peak figures, split the motion into shorter intervals and run each one.

Elapsed time must be greater than zero. Work can be positive or negative, so you can model a brake absorbing energy as well as a motor supplying it.

Watts, horsepower and electrical power

One watt is one joule per second. NIST lists one mechanical horsepower (550 ft·lbf/s) as 745.6999 W, so divide a watt figure by about 745.7 to compare with an engine rating. The Power Converter switches between watts, kilowatts and horsepower.

For circuits, you usually know voltage and current rather than joules. The Electrical Power Calculator multiplies those directly. To go from watts to a utility bill, the Electricity Cost Calculator turns power and hours into kilowatt-hours and cost.

Worked example

Lifting a 50 kg box onto a 3 m platform in 4 seconds

Signed work/energy: 1470.9975 J · Elapsed time: 4 s

  1. Work = m × g × h = 50 × 9.80665 × 3 = 1,470.9975 J
  2. Power = 1,470.9975 ÷ 4
  3. Power = 367.749375 W, about half a horsepower

Result: 367.749375 W

Assumptions and limits

SI units; idealized classical equation. Not a safety assessment or certified engineering design.

Formula and worked examples last checked November 20, 2026. Spotted a problem? Report an error.

Frequently asked questions

How many watts is one horsepower?

Mechanical horsepower, defined as 550 foot-pounds-force per second, equals 745.6999 W according to NIST SP 811. Metric horsepower is a slightly different unit, so check which one a specification uses.

What is the difference between energy and power?

Energy is an amount, measured in joules or kilowatt-hours. Power is how fast that energy is used, measured in watts. A 100 W bulb left on for 10 hours uses 1,000 Wh, or 1 kWh.

How do I calculate the power needed to climb stairs?

Multiply your mass by 9.80665 and by the vertical height of the stairs to get work in joules, then divide by the seconds taken. A 70 kg person climbing 4 m in 5 s does about 2,746 J and averages about 549 W.

Why would power be negative?

A negative work value means the system lost energy, for example a car's brakes removing kinetic energy. The sign carries through, so the result shows the rate at which energy is being removed.

Sources