This converter turns a floor area, lot size or field measurement in square feet into acres, or an acreage into square feet. Every answer also lists the same area in square meters and hectares, so you can compare a US property listing with a metric survey or a farm record from another country.
How to use the Square Feet to Acres calculator
- Pick a direction under Conversion: Square feet to acres, or Acres to square feet.
- Type the number in Area to convert. Decimals are fine (0.75 acres, 2,150.5 ft² typed as 2150.5); negative areas are rejected.
- Read the main result, then check the detail line for the matching square meters and hectares.
- If your figure comes from an old deed or a state plane survey, read the note on the U.S. survey foot below before relying on the last few digits.
How the square feet to acres calculation works
Where 43,560 comes from
An acre is not defined as a square. It is defined by area: NIST Handbook 44 lists 1 acre as 10 square chains, 160 square rods, or 43,560 square feet. A chain is 66 feet, so one acre is the area of a strip one chain wide and ten chains (one furlong, 660 feet) long: 66 × 660 = 43,560.
Because the definition is an exact whole number of square feet, the conversion has no rounding in it. Square feet to acres is a single division by 43,560, and acres to square feet is a single multiplication. The calculator rounds only the displayed result, to six decimal places.
If you picture an acre as a square, each side is about 208.71 feet, since 208.71² is very close to 43,560. Real lots are rarely square, which is why an acre lot can look very different from one neighborhood to the next.
Square meters, hectares and the metric side
Since 1959 the foot has been exactly 0.3048 meter, so one square foot is exactly 0.09290304 m². Multiply 43,560 by that and one acre comes out at 4,046.8564224 m², a figure NIST also gives as exact. A hectare is 10,000 m², which makes an acre 0.40468564224 hectare and a hectare about 2.471 acres.
The calculator works out square meters from your square footage and divides by 10,000 for hectares. That keeps all four numbers in the detail line consistent with each other, even though each is rounded separately for display.
The survey foot retirement in 2023
Until the end of 2022, US land measurements could use the U.S. survey foot, defined as 1200/3937 meter, which is about two parts per million longer than the international foot. The acre, chain, rod and other land units were defined only in survey feet. NIST and NOAA retired the survey foot on January 1, 2023; since then the plain foot (0.3048 m) applies to all new work.
For an area unit the difference doubles to about four parts per million. A survey acre is 4,046.872609874 m², about 0.016 m² more than the international acre. On a 100-acre parcel that is roughly 1.6 m² in total, far below what a tape or GPS survey resolves. You only need to care when you are matching coordinates or legal descriptions from older survey records to many significant figures.
Worked examples
Conversion: Square feet to acres · Area to convert: 10000
- Acres = 10,000 ÷ 43,560.
- 10,000 ÷ 43,560 = 0.2295684…, shown as 0.229568.
- Square meters = 10,000 × 0.09290304 = 929.0304 m², or about 0.0929 hectare.
Result: 0.229568 acres
Conversion: Acres to square feet · Area to convert: 0.25
- Square feet = 0.25 × 43,560.
- 43,560 ÷ 4 = 10,890 ft².
- In metric terms: 10,890 × 0.09290304 = 1,011.714 m², just over a tenth of a hectare.
Result: 10,890 ft²
Assumptions and limits
Uses the international foot (1 ft = 0.3048 m exactly). The retired U.S. survey acre differs by about 4 parts per million, which matters only for legacy survey records.
Formula and worked examples last checked November 20, 2026. Spotted a problem? Report an error.
Frequently asked questions
How many square feet are in an acre?
Exactly 43,560 square feet. NIST Handbook 44 defines the acre as 10 square chains or 160 square rods, and both of those work out to 43,560 ft². Half an acre is 21,780 ft² and a quarter acre is 10,890 ft².
How many acres is 1,000 square feet?
1,000 ÷ 43,560 = 0.022957 acres, a little over two hundredths of an acre. A typical apartment or small house footprint is a tiny fraction of an acre, so you will usually want to see the answer to several decimal places, which the calculator shows.
How big is an acre compared with a football field?
An American football field measures 360 by 160 feet including both end zones, which is 57,600 ft² or about 1.32 acres. Without the end zones, the 300 by 160 foot playing area is 48,000 ft², about 1.1 acres.
How many acres are in a square mile?
640 acres. A mile is 5,280 feet, so a square mile is 5,280² = 27,878,400 ft², and 27,878,400 ÷ 43,560 = 640. A quarter section of land, common in US land records, is 160 acres.
Is an acre bigger than a hectare?
No. A hectare (10,000 m²) is about 2.471 acres, so an acre is roughly 40% of a hectare. If you are comparing land prices, a price per hectare divided by 2.471 gives the price per acre.
Does the end of the U.S. survey foot change my property size?
Not in any practical sense. The old survey acre was about four parts per million larger, which is under 0.2 ft² on a one-acre lot. Your deed acreage stays the same; only high-precision survey work needs to track which foot was used.