The short answer: 43,560 square feet
One acre is exactly 43,560 square feet. The figure is not an approximation or a rounded average. NIST Handbook 44, the reference US weights and measures officials work from, lists the acre as 43,560 square feet exactly and as 0.40468564224 hectare exactly.
An acre is a measure of area, not a shape. A long narrow strip, a wedge at the end of a cul-de-sac and a neat rectangle can all be one acre, as long as the space inside the boundary adds up to 43,560 square feet. Handbook 44 makes the same point: an acre is not necessarily square or rectangular.
Because the number is exact, every conversion is a single step. Divide square feet by 43,560 to get acres, or multiply acres by 43,560 to get square feet. The only rounding comes from how many decimal places you choose to keep.
Converting a real lot in both directions
Most residential lots are described in square feet on a plat and in acres in a listing, so you often need to go back and forth. Start with the lot dimensions, find the area in square feet, then divide.
Suppose a rectangular lot is 75 feet wide and 140 feet deep. The Square Footage Calculator gives 10,500 ft². Entering 10,500 in the Square Feet to Acres converter returns 0.241047 acres, a little less than a quarter acre. A listing that rounds this to "0.24 acres" is accurate; one that calls it "a quarter acre" is generous by about 390 square feet.
The same division puts a house in context. A 2,400 ft² single-story footprint covers 0.055096 acres, or about 5.5% of a full acre. That is why even a large house on a half-acre lot still leaves most of the land open.
Measuring land that is not a rectangle
Real parcels often have an angled side, a curved front or a panhandle driveway. The reliable approach is to split the outline into rectangles and right triangles, find the area of each piece, add them, and only then convert to acres. A right triangle is half of base × height.
Measure at right angles. For a triangle, the height is the perpendicular distance from the base to the far corner, not the length of the slanted side. Using the slanted side overstates the area.
For anything you will buy, sell, fence or build on, the recorded survey or plat is the document that counts. Your own tape measurements are good for planning and for checking that a listing is in the right range, but property lines are a job for a licensed surveyor.
Picturing an acre and larger tracts
Since the acre has no fixed shape, it helps to picture a few versions. A strip 100 feet wide would need to be 435.6 feet long. A lot 150 feet wide would need 290.4 feet of depth. Those are the kinds of frontage-and-depth pairs you see on rural road listings.
For bigger tracts, the square mile is the natural step up. A mile is 5,280 feet, so a square mile is 27,878,400 ft², which is exactly 640 acres. Handbook 44 notes that a section of land is approximately one mile square, which is why old land descriptions talk about a quarter section of 160 acres or a quarter-quarter of 40 acres.
Acres, square meters and hectares
If you compare a US listing with land measured in metric units, the hectare is the unit to know. One hectare is 10,000 square meters, and one acre is about 4,046.86 square meters, so a hectare is roughly 2.47 acres.
The Area Converter handles these directly. Three acres come out at 1.214057 hectares, and two hectares are 4.942108 acres. Notice that the numbers are close to, but not the same as, a quick "multiply by 2.5" estimate. On a 2-hectare farm that shortcut would overstate the area by about 0.06 acres, or roughly 2,500 square feet.
Since January 1, 2023, NIST treats the old U.S. survey foot as superseded by the international foot. The two differ by about two parts per million in length, which changes an acre by a fraction of a square foot. You only need to think about it when reading high-precision survey coordinates.
Turning price per acre into price per square foot
Land is often advertised per acre while lots in town are priced per square foot. Converting both to the same unit makes them comparable. Divide a per-acre price by 43,560 to get the price per square foot, or multiply a per-square-foot price by 43,560 for the per-acre figure.
This is arithmetic, not a valuation. Two parcels with the same price per square foot can be very different buys once you account for road access, utilities, zoning and how much of the land is usable. A local appraiser or agent can speak to those factors.
Mistakes that throw the answer off
Rounding fractions too early. Typing one-third of an acre as 0.3333 returns 14,518.548 ft², about 1.5 ft² short of the true 14,520. For fractions, divide 43,560 by the denominator instead of entering a rounded decimal.
Assuming an acre is 208 feet on a side. A 208 × 208 square is 43,264 ft², which is 296 ft² short. The side of a square acre is closer to 208.71 feet, and most lots are not square anyway.
Mixing units inside one calculation. If one side is in feet and another in yards or meters, convert everything to feet before multiplying. A yard is 3 feet, so a square yard is 9 square feet, not 3.
Treating listing acreage as exact. Listings often round to two decimal places, and a quick figure typed into a listing is not a survey. When a few hundred square feet matter, read the plat or survey.
Which calculator to use
Use the Square Footage Calculator first when you have length and width in feet and need the area of a rectangular lot or one piece of an irregular lot. Then take that total to the Square Feet to Acres converter, which also shows square meters and hectares in its detail line.
Use the Area Converter when your starting figure is already in hectares, square meters or square kilometers, or when you need a unit the acre converter does not show. Whichever tool you use, write down the square-foot total before converting; it is the easiest number to double-check later.