1. Home
  2. Construction
  3. Square Footage Calculator
Construction

Square Footage Calculator

Find the floor area of a rectangular room in square feet.

Your numbers

ft
ft

Results update as you type. Nothing you enter is sent anywhere.

Result

120 ft²

Area = length × width. Rectangular measurements; supplied dimensions must describe the same space. No structural or engineering certification.

Formula used

Area = length × width

The Square Footage Calculator finds the floor area of a rectangular room or space in square feet from its length and width. It is the first number you need for flooring, carpet, paint estimates, rent comparisons and furniture planning. For L-shaped or irregular rooms, measure in rectangles and add the results.

How to use the Square Footage calculator

  1. Measure the room wall to wall at floor level and enter Length in feet.
  2. Enter Width in feet. Convert inches to decimal feet by dividing by 12, so 10 ft 6 in becomes 10.5.
  3. Read the area in ft². For an irregular room, repeat for each rectangle and add the results.
  4. Pass the figure to the Flooring or Tile calculator, converting to square meters first (multiply by 0.09290304), since those tools work in metric. Keep your measurements written down; you will need the individual sides again for baseboard or trim lengths.

How the square footage calculation works

FormulaArea = length × width

Measuring a room accurately

Measure along the floor rather than at waist height, where baseboards and trim are out of the way but walls may not be straight. In older houses, measure both long walls and both short walls; if they differ, use the larger figure for buying materials, because you cannot install flooring you did not buy.

Inches must become decimals before you type them. 12 ft 3 in is 12 + 3 ÷ 12 = 12.25 ft, not 12.3. Entering 12.3 overstates the side by about an inch, a small error that grows across a whole house.

L-shaped and irregular rooms

Split the floor into rectangles that do not overlap, run each one, and add the results. An L-shaped living room might be a 16 × 12 ft main area plus an 8 × 6 ft alcove: 192 + 48 = 240 ft². Closets that will receive the same flooring are included the same way.

For a triangular corner, multiply the two straight sides and halve the answer. For a bay window or curved wall, measure to the widest point as a rectangle; the slight overestimate becomes part of your cutting allowance. Sketch the room on paper with each rectangle labeled, so you can check later that no section was counted twice or missed.

Converting square feet to other units

One square foot is exactly 0.09290304 m², because a foot is exactly 0.3048 m. One square meter is about 10.764 ft². One square yard is 9 ft², a unit some carpet suppliers still quote in. An acre is roughly 43,560 ft², which is why lot sizes use acres and rooms use square feet.

A room's square footage is not the same as a home's listed living area. Listings may include or exclude spaces such as stairs, garages and unfinished basements under rules that vary by market, so compare like with like when judging price per square foot.

Worked examples

A bedroom measuring 14 ft by 11 ft 6 in

Length: 14 ft · Width: 11.5 ft

  1. Convert 11 ft 6 in to decimal feet: 11 + 6 ÷ 12 = 11.5 ft.
  2. Area: 14 × 11.5 = 161 ft².
  3. In square meters: 161 × 0.09290304 ≈ 14.96 m², the figure to enter in the metric Flooring Calculator.

Result: 161 ft²

A kitchen measuring 12 ft 3 in by 10 ft 6 in

Length: 12.25 ft · Width: 10.5 ft

  1. 12 ft 3 in = 12 + 3 ÷ 12 = 12.25 ft.
  2. 10 ft 6 in = 10 + 6 ÷ 12 = 10.5 ft.
  3. Area: 12.25 × 10.5 = 128.625 ft², or about 14.29 square yards (÷ 9).

Result: 128.625 ft²

Assumptions and limits

Rectangular measurements; supplied dimensions must describe the same space. No structural or engineering certification.

Formula and worked examples last checked November 20, 2026. Spotted a problem? Report an error.

Frequently asked questions

How do you work out the square feet of a bedroom?

Multiply the length by the width, both in feet. A 12 × 15 ft room is 180 ft². If the room is not a rectangle, divide it into rectangles, calculate each, and add them together.

How many square feet is a 12 × 12 room?

144 square feet. That is 16 square yards, or about 13.38 m². A 10 × 10 room is 100 ft² and a 12 × 14 room is 168 ft².

How do I convert inches to feet for square footage?

Divide the inches by 12 and add them to the feet. 9 inches is 0.75 ft, so 10 ft 9 in is 10.75 ft. Do this before multiplying, not after.

How do I turn square meters into square feet?

About 10.764. A square foot is exactly 0.09290304 m², so 20 m² is 20 ÷ 0.09290304 ≈ 215.3 ft².

Should I subtract cabinets or fixtures from the floor area?

For flooring that goes under appliances, such as vinyl in a kitchen, keep the full area. For areas where nothing will be installed, such as under fixed cabinets or a bathtub, you can subtract their footprint. Paint and wall estimates use wall area instead, measured as wall length × height.

Sources