1. Home
  2. Science & engineering
  3. Pressure Calculator
Science & engineering

Pressure Calculator

Calculate uniform pressure from perpendicular force and area.

Your numbers

N
m²

Results update as you type. Nothing you enter is sent anywhere.

Result

50 Pa

P = force ÷ area. SI units; idealized classical equation. Not a safety assessment or certified engineering design.

Formula used

P = force ÷ area

Pressure is force spread over an area. Enter a force in newtons and the contact area in square meters, and this calculator returns pascals. Use it for footprints, hydraulic pistons, table legs or any load pressing evenly on a surface.

How to use the Pressure calculator

  1. Enter Normal force in newtons, the force acting perpendicular to the surface. For a resting weight, use mass × 9.80665.
  2. Enter Contact area in m². 1 cm² is 0.0001 m², and 1 in² is 0.00064516 m².
  3. Read pressure in Pa. Divide by 1,000 for kPa.

How the pressure calculation works

FormulaP = force ÷ area

Choosing the force and area

Only the perpendicular part of a force creates pressure. If a load pushes at an angle, use the component straight into the surface. The calculator assumes the force is spread evenly across the area; a stiletto heel or a point load concentrates it far more than an average suggests.

Contact area must be greater than zero, and force must be zero or more. Area mistakes dominate: a footprint of 250 cm² is 0.025 m², not 250.

Comparing with familiar units

One pascal is one newton per square meter, a very small pressure. NIST gives standard atmospheric pressure as exactly 101,325 Pa and one psi as 6,894.757 Pa. Tire gauges show gauge pressure, which is the amount above atmospheric.

The Pressure Converter switches between Pa, kPa, bar, psi and atm once you have a result here.

Worked example

Pressure under a person standing on two feet

Normal force: 686.47 N · Contact area: 0.05 m²

  1. Weight of 70 kg = 70 × 9.80665 = 686.47 N (rounded)
  2. Two shoe soles total about 0.05 m²
  3. P = 686.47 ÷ 0.05 = 13,729.4 Pa
  4. About 13.7 kPa, or 1.99 psi

Result: 13,729.4 Pa

Assumptions and limits

SI units; idealized classical equation. Not a safety assessment or certified engineering design.

Formula and worked examples last checked November 20, 2026. Spotted a problem? Report an error.

Frequently asked questions

How do I convert pascals to psi?

Divide by 6,894.757. For example, 100,000 Pa is about 14.5 psi. Multiply psi by the same factor to get pascals.

What is atmospheric pressure in pascals?

Standard atmospheric pressure is defined as exactly 101,325 Pa, or about 101.3 kPa. Actual air pressure varies with weather and altitude.

Why do snowshoes stop you sinking?

They spread the same body weight over a much larger area. Doubling the contact area halves the pressure on the snow.

How do I find the force from a pressure?

Multiply pressure by area. A hydraulic cylinder with 0.002 m² of piston area at 5,000,000 Pa pushes with 10,000 N.

Sources