1. Home
  2. Science & engineering
  3. Torque Calculator
Science & engineering

Torque Calculator

Find torque magnitude from force, lever arm and angle.

Your numbers

N
m
degrees

Results update as you type. Nothing you enter is sent anywhere.

Result

20 N·m

Torque = force × lever arm × sin(angle). SI units; idealized classical equation. Not a safety assessment or certified engineering design. Torque magnitude, not rotational direction.

Formula used

Torque = force × lever arm × sin(angle)

Torque measures how strongly a force twists something around a pivot. This calculator multiplies the force by the lever arm and by the sine of the angle between them, returning newton-meters. It works for wrenches, door handles, pedals and simple levers.

How to use the Torque calculator

  1. Enter Force in newtons. A pull of 20 kgf is about 196 N.
  2. Enter Lever arm in meters, measured from the pivot (the bolt center or hinge) to where the force is applied.
  3. Enter Force/lever angle in degrees, from 0 to 180. A push straight across the handle is 90.
  4. Read the torque magnitude in N·m.

How the torque calculation works

FormulaTorque = force × lever arm × sin(angle)

Why the angle matters

Only the part of the force perpendicular to the lever turns it. At 90° the sine is 1, so you get the full force × arm. At 30° the sine is 0.5 and the torque halves. Pushing straight along the handle, at 0° or 180°, produces no turning effect at all.

At exactly 0° or 180° the force points straight along the lever arm, so the torque is exactly 0 N·m: none of the push turns the bolt.

What the result does not include

The calculator returns a magnitude only, so it does not say whether the twist is clockwise or counterclockwise. It also ignores friction in threads. A torque spec for a bolt refers to the reading on a torque wrench, and thread condition and lubrication change how much clamping force that produces, so follow the manufacturer's value.

NIST gives one pound-force foot as 1.355818 N·m. Divide newton-meters by that factor to compare with a wrench marked in lbf·ft.

Worked example

Wrench pulled at an angle

Force: 200 N · Lever arm: 0.3 m · Force/lever angle: 60 degrees

  1. Force 200 N on a 0.3 m wrench, pulled at 60° to the handle
  2. sin 60° = 0.866025…
  3. Torque = 200 × 0.3 × 0.866025… = 51.961524 N·m
  4. About 38.3 lbf·ft

Result: 51.961524 N·m

Assumptions and limits

SI units; idealized classical equation. Not a safety assessment or certified engineering design. Torque magnitude, not rotational direction.

Formula and worked examples last checked November 20, 2026. Spotted a problem? Report an error.

Frequently asked questions

How do I convert N·m to ft-lb?

Divide by 1.355818. For example, 100 N·m is about 73.76 lbf·ft. Multiply by the same factor to go from lbf·ft to N·m.

Does a longer wrench give more torque?

Yes, for the same force. Doubling the lever arm from 0.25 m to 0.5 m doubles the torque, which is why a breaker bar loosens stuck nuts that a short wrench cannot.

Is torque the same as work, since both use N·m?

They share a unit but mean different things. Work is force along a displacement and is expressed in joules; torque is force across a lever arm and is written as N·m to keep the two distinct.

What angle should I enter for a normal wrench pull?

If you pull at right angles to the handle, enter 90. If the handle is tilted relative to your pull, estimate the angle between the handle and your line of force; anything other than 90 lowers the result.

Sources