The Area Calculator gives the area of a rectangle in square meters from its length and width. It works for rooms, plots, walls, roofs seen from above, garden beds and sheets of material, and its result feeds directly into the site's Paint, Flooring, Tile, Gravel and Mulch calculators, which all take square meters.
How to use the Area calculator
- Enter Length in meters. Convert centimeters by dividing by 100, so 450 cm is 4.5 m.
- Enter Width in meters, measured at right angles to the length.
- Read the area in m². For shapes made of several rectangles, run each and add the results.
- To get square feet, multiply by about 10.764, or use the Square Footage Calculator if your measurements are already in feet.
How the area calculation works
Units are where area mistakes happen
Area grows with the square of the unit, so a unit slip is never small. A wall measured as 450 by 250 and typed in as meters gives 112,500 m², not the 11.25 m² it really is. Convert everything to meters before entering it: centimeters ÷ 100, millimeters ÷ 1,000, feet × 0.3048.
Both sides must also be in the same unit. Mixing a length in meters with a width in centimeters produces a result 100 times too large or too small. If the answer looks implausible for the space, the units are the first thing to check. A bedroom that comes out under 5 m² or over 50 m², for instance, deserves a second look at the inputs before you order anything.
Using the area for materials
For walls, use the net area: the full wall area minus doors and windows. Measure each opening rather than guessing, since door and window sizes vary. For floors, use the gross area and let the waste allowance in the Flooring or Tile calculator handle cuts.
The Paint Calculator needs net wall area, while the Flooring and Tile calculators take floor area and add their own waste allowance, so do not add extra here. For gravel or mulch, the same area is multiplied by a depth to give volume. For large outdoor spaces, a hectare is exactly 10,000 m² and an acre is about 4,047 m². A 30 × 18 m lot is 540 m², about 0.054 hectares or 0.13 acres.
Non-rectangular shapes
The calculator assumes a rectangle. For a right triangle, enter the two sides at right angles and halve the result. For a circle, use π × radius² instead: a round patio 3 m across has a radius of 1.5 m and an area of about 7.07 m².
Irregular plots can be split into rectangles and triangles, measured separately and summed. For a four-sided plot whose opposite sides are not quite equal, averaging each pair of opposite sides before multiplying gives a close estimate, though a surveyor's figure is the one to rely on for legal or sale purposes. For sloping surfaces such as roofs, the horizontal area understates the real surface; the Roofing Calculator corrects for pitch.
Worked examples
Length: 6.2 m · Width: 4.5 m
- Both sides are already in meters.
- Area: 6.2 × 4.5 = 27.9 m².
- In square feet: 27.9 ÷ 0.09290304 ≈ 300.3 ft².
Result: 27.9 m²
Length: 30 m · Width: 18 m
- Area: 30 × 18 = 540 m².
- In hectares: 540 ÷ 10,000 = 0.054 ha.
- In acres: 540 ÷ 4,047 ≈ 0.133 acres.
Result: 540 m²
Assumptions and limits
Rectangular measurements; supplied dimensions must describe the same space. No structural or engineering certification.
Formula and worked examples last checked November 20, 2026. Spotted a problem? Report an error.
Frequently asked questions
How do I calculate area in square meters?
Multiply length by width, both in meters. A 5 × 4 m room is 20 m². If you measured in centimeters, divide each side by 100 first: 500 cm × 400 cm becomes 5 m × 4 m.
How do I convert square meters to square feet?
Multiply by about 10.764. 20 m² is roughly 215.3 ft². The exact relationship is 1 ft² = 0.09290304 m², so dividing by that number gives the same answer.
How many square meters is an acre?
About 4,047 m². A hectare is exactly 10,000 m², so one hectare is roughly 2.47 acres.
How do I find the area of an irregular shape?
Break it into rectangles and triangles, calculate each separately, and add them. A triangle's area is half of base × height. For curved edges, measure to the outermost point; the small overestimate acts as a material allowance.
Should I measure walls with doors and windows included?
Measure the full wall, then subtract each door and window (width × height) to get the net area for paint or cladding. For tiles or panels that are cut around openings, some installers keep a little of the opening area as extra allowance.