1. Home
  2. Construction
  3. Concrete Calculator
Construction

Concrete Calculator

Estimate wet concrete volume for a rectangular slab with waste allowance.

Your numbers

m
m
m
%

Results update as you type. Nothing you enter is sent anywhere.

Result

2.2 m³

Concrete volume = length × width × depth × (1 + waste/100). Wet mixed concrete volume, not bag count. No footings, reinforcement or mix design. Waste chosen by you.

Formula used

Concrete volume = length × width × depth × (1 + waste/100)

The Concrete Calculator estimates how much wet concrete a rectangular slab needs, with a waste allowance you choose. Use it before ordering ready-mix or buying bags for a patio, shed base, walkway or garage pad. All dimensions are in meters and the answer is in cubic meters, so US users will usually convert feet, inches and cubic yards along the way.

How to use the Concrete calculator

  1. Enter Slab length and Slab width in meters. To convert feet, multiply by 0.3048: a 10 ft side is 3.048 m.
  2. Enter Depth in meters, not centimeters or inches. A 4-inch slab is 4 × 0.0254 = 0.1016 m, and a 12 cm slab is 0.12 m.
  3. Set Waste allowance as a percentage. It covers spillage, uneven ground and concrete left in the truck or mixer; 0 gives the exact geometric volume.
  4. Read the volume in m³. Multiply by 1.30795 for cubic yards, or by 35.3147 for cubic feet if you are buying bags.

How the concrete calculation works

FormulaConcrete volume = length × width × depth × (1 + waste/100)

What the result covers

The calculator multiplies length × width × depth to get the slab's volume, then increases it by your waste percentage. That is the volume of fresh, placed concrete. It does not include footings, thickened edges, post holes or steps, so calculate those separately and add them. Rebar and mesh take up very little volume and are ignored.

Depth is where most estimates go wrong. A slab specified at 4 inches is often thicker in low spots once the base is graded, and a 1/2-inch dip across a whole slab adds 12.5% to the volume. If the subgrade is uneven, either level it more carefully or use a larger waste allowance. In the US, the International Residential Code sets 3.5 inches as the minimum thickness for concrete floors on ground; driveways, heavy loads and local amendments can require more, so check the plans or your building department.

Converting to cubic yards for a ready-mix order

US ready-mix suppliers sell by the cubic yard. One cubic yard is 27 cubic feet, or 0.764555 m³, so divide the calculator's result by 0.764555, or multiply by 1.30795. A 10 × 10 ft slab at 4 inches thick works out to 1.23 yd³ before waste. Many suppliers deliver in set increments and charge extra for small loads, so ask how they round before you order.

If your measurements start in feet, there is a shortcut: length (ft) × width (ft) × depth (in) ÷ 324 gives cubic yards directly, since 27 × 12 = 324. For 10 × 10 ft × 4 in, that is 400 ÷ 324 = 1.23 yd³, which matches the metric route.

Converting to bags of premixed concrete

For small jobs, bagged mix is often easier. The yield is printed on each bag and varies by product. QUIKRETE's standard Concrete Mix lists about 0.60 cubic feet (17 liters) per 80 lb bag, so one cubic yard needs 27 ÷ 0.60 = 45 bags. Divide the calculator's result in liters (m³ × 1,000) by the bag yield in liters, and round up.

Check the yield on the exact product you buy, because high-yield and fast-setting mixes differ from standard mix. The waste allowance you set here carries through to the bag count, so you do not need to add extra bags on top.

Worked examples

A 10 × 10 ft patio, 4 inches thick, with 10% waste

Slab length: 3.048 m · Slab width: 3.048 m · Depth: 0.1016 m · Waste allowance: 10 %

  1. Convert: 10 ft × 0.3048 = 3.048 m; 4 in × 0.0254 = 0.1016 m.
  2. Volume: 3.048 × 3.048 × 0.1016 = 0.943895 m³ (about 1.23 yd³).
  3. Add waste: 0.943895 × 1.10 = 1.038284 m³.
  4. In cubic yards: 1.038284 × 1.30795 ≈ 1.36 yd³. In 80 lb bags at 0.60 ft³ each: 1.038284 × 35.3147 ≈ 36.67 ft³ ÷ 0.60 ≈ 61.1, so 62 bags.

Result: 1.038284 m³

A 6 × 4 m shed base, 12 cm thick, with 8% waste

Slab length: 6 m · Slab width: 4 m · Depth: 0.12 m · Waste allowance: 8 %

  1. Plan area: 6 × 4 = 24 m².
  2. Volume: 24 × 0.12 = 2.88 m³.
  3. Add waste: 2.88 × 1.08 = 3.1104 m³.
  4. That is about 3.1104 × 1.30795 ≈ 4.07 yd³ if your supplier quotes in cubic yards.

Result: 3.1104 m³

Assumptions and limits

Wet mixed concrete volume, not bag count. No footings, reinforcement or mix design. Waste chosen by you.

Formula and worked examples last checked November 20, 2026. Spotted a problem? Report an error.

Frequently asked questions

How many 80 lb bags of concrete make a cubic yard?

About 45, if each bag yields 0.60 cubic feet as QUIKRETE's standard Concrete Mix does: 27 ÷ 0.60 = 45. Products with other yields need a different count, so check the bag. Add your waste allowance on top of the exact figure.

How much concrete do I need for a 10 × 10 slab?

At 4 inches thick, a 10 × 10 ft slab is 33.3 cubic feet, or 1.23 cubic yards (0.944 m³), before waste. At 6 inches it is 1.85 cubic yards. Add your chosen waste percentage before ordering.

How thick should a concrete slab be?

The International Residential Code's minimum for a concrete floor on ground is 3.5 inches, and slabs are commonly specified at 4 inches to meet it. Driveways, garages and slabs carrying heavy loads may need more, and local codes can differ. Follow your plans or ask your building department.

Why does my concrete order come up short?

Usually because the base is lower than planned or the forms bow outward. Even a quarter inch of extra depth adds over 6% to a 4-inch slab. Measure depth in several places after grading and size the waste allowance to match.

Does the calculator work for footings or columns?

It works for any rectangular block: enter the footing's length, width and depth. For round columns or post holes, calculate π × radius² × depth separately, since this calculator assumes a rectangle.

Can I enter dimensions in feet?

Not directly; the fields are in meters. Multiply feet by 0.3048 and inches by 0.0254 first, or use the length × width × depth (in) ÷ 324 shortcut for cubic yards.

Sources