1. Home
  2. Construction
  3. Flooring Calculator
Construction

Flooring Calculator

Estimate flooring purchase area including an explicit cutting allowance.

Your numbers

m²
%

Results update as you type. Nothing you enter is sent anywhere.

Result

22 m²

Purchase area = floor area × (1 + waste/100). No assumed box size or pattern; round up to supplier package units separately.

Formula used

Purchase area = floor area × (1 + waste/100)

The Flooring Calculator tells you how much flooring to buy for a room once cutting waste is included. Enter the net floor area and a waste percentage, and it returns the purchase area in square meters, ready to divide by the coverage of one box.

How to use the Flooring calculator

  1. Enter Net floor area in square meters. If you measured in feet, run the Square Footage Calculator and multiply by 0.09290304.
  2. Set Waste allowance as a percentage for end cuts, pattern matching and spare boards.
  3. Read the purchase area, then divide by the area per box shown on the product label and round up to whole boxes.

How the flooring calculation works

FormulaPurchase area = floor area × (1 + waste/100)

Why flooring needs a waste allowance

Laminate, engineered wood and vinyl plank are cut at every wall and around door frames. Offcuts from one row can sometimes start the next, but not always, and boards with defects get rejected. Diagonal layouts and patterns such as herringbone produce much more waste than straight runs.

The installation instructions for many products recommend a waste figure, and an installer can advise for an unusual room. Keeping a box of spares also helps with future repairs, since a discontinued product is hard to match.

From area to boxes

The calculator returns an area, not a box count, because coverage per box varies by product. Divide the purchase area by the box coverage and round up. Check whether the coverage is stated in square feet or square meters before dividing.

Underlayment, transition strips and baseboards are separate purchases. Underlayment is usually sold by area too, so you can reuse the net floor area for it. Baseboard and trim are sold by length, so add up the room's perimeter and subtract door openings instead; the Fence Length Calculator does the same perimeter arithmetic for a rectangle. Check that all the boxes you buy share one production lot, since color and shade can vary slightly from one lot to the next.

Worked example

A 200 sq ft room (18.6 m²) with 10% waste

Net floor area: 18.6 m² · Waste allowance: 10 %

  1. Convert: 200 ft² × 0.09290304 ≈ 18.58 m², rounded to 18.6.
  2. Add waste: 18.6 × 1.10 = 20.46 m².
  3. If one box covers 2.2 m²: 20.46 ÷ 2.2 = 9.3, so buy 10 boxes.

Result: 20.46 m²

Assumptions and limits

No assumed box size or pattern; round up to supplier package units separately.

Formula and worked examples last checked November 20, 2026. Spotted a problem? Report an error.

Frequently asked questions

How much extra flooring should I buy?

Use the figure in the product's installation instructions if it gives one, and more for diagonal or herringbone layouts or rooms with many corners. Rounding up to whole boxes adds a little more on top.

How many boxes of flooring do I need?

Divide the purchase area from this calculator by the coverage on one box and round up. 20.46 m² with boxes of 2.2 m² is 9.3, so 10 boxes.

Do I include closets in the flooring area?

Yes, if the same flooring continues into them. Measure each closet as its own rectangle and add it to the room's area before entering the total.

How do I convert square feet of flooring to square meters?

Multiply by 0.09290304. A 300 ft² floor is about 27.87 m². To convert back, divide square meters by the same factor.

Sources