The Paint Calculator estimates how many liters of paint a job needs from the paintable area, the number of coats and the coverage printed on the can. Adding a waste allowance accounts for what stays in the tray and roller. The result is in liters, so US users can divide by 3.785 for gallons.
How to use the Paint calculator
- Enter Net paintable area in square meters: total wall area minus doors, windows and anything you will not paint.
- Enter Coats as a whole number. New drywall and strong color changes usually need more than one.
- Enter Manufacturer coverage in m²/L from the can or data sheet. If it is given in square feet per gallon, multiply by 0.024542 to convert.
- Add a Waste allowance for tray, roller and touch-ups, then read the liters and round up to the can sizes sold.
How the paint calculation works
Getting the area and coverage right
Wall area is the room's perimeter times the wall height. A 4 × 5 m room with 2.5 m ceilings has walls of 2 × (4 + 5) × 2.5 = 45 m². Subtract each door and window by measuring width × height. Ceilings are calculated separately as length × width, and usually take a different paint.
Coverage on the label is measured on smooth, primed surfaces. Rough plaster, textured ceilings, bare wood and fresh drywall absorb more, so if the label gives a range, use the lower figure. A label reading 400 square feet per gallon converts to 400 × 0.024542 ≈ 9.8 m²/L.
Turning liters into cans
The calculator does not round to can sizes, because those differ between brands and countries. Divide the result by the can volume and round up, then consider whether a larger can is cheaper than two smaller ones. In the US, a gallon is about 3.785 liters and a quart about 0.946 liters.
Keep some paint after the job for touch-ups; matching a color later from a new batch is not always exact. That is one more reason to round up rather than down.
Worked example
Net paintable area: 38 m² · Coats: 2 · Manufacturer coverage: 10 m²/L · Waste allowance: 10 %
- Total area to cover: 38 m² × 2 coats = 76 m².
- Paint before waste: 76 ÷ 10 m²/L = 7.6 L.
- With 10% extra: 7.6 × 1.10 = 8.36 L.
- In US gallons: 8.36 ÷ 3.785 ≈ 2.21, so you would buy 2 gallons plus a quart, or 3 gallons.
Result: 8.36 L
Assumptions and limits
Subtract openings before entering area. Use actual manufacturer coverage; texture/porosity not automatically modeled. Does not round to can sizes.
Formula and worked examples last checked November 20, 2026. Spotted a problem? Report an error.
Frequently asked questions
How much paint do I need for a 12 × 12 room?
With 8 ft ceilings, the walls are 4 × 12 × 8 = 384 ft² before doors and windows. Subtract about 20 ft² per door and 15 ft² per window as rough sizes, or measure your own. At 400 ft² per gallon, two coats on about 340 ft² need roughly 1.7 gallons.
How do I convert square feet per gallon to square meters per liter?
Multiply by 0.024542. That factor comes from 0.09290304 m² per ft² divided by 3.785412 L per US gallon. So 350 ft²/gal is about 8.6 m²/L.
Do I need two coats of paint?
Often, especially over new drywall, a strong color change or a patchy surface. The paint label states its recommended number of coats, and primer counts as a separate coat with its own coverage.
Should I include the ceiling in the area?
Only if you are painting it with the same paint. Ceiling paint is usually different, so calculate the ceiling separately as length × width and run the calculator twice.