1. Home
  2. Construction
  3. Brick Calculator
Construction

Brick Calculator

Estimate whole bricks from net wall area and a selected brick module.

Your numbers

m²
m
m
m
%

Results update as you type. Nothing you enter is sent anywhere.

Result

500 bricks

Bricks = ceiling(net area ÷ ((brick length + joint) × (brick height + joint)) × (1 + waste/100)). Single face/skin only; subtract openings. Joint approximated as a rectangular module. Bond patterns and load-bearing design excluded.

Formula used

Bricks = ceiling(net area ÷ ((brick length + joint) × (brick height + joint)) × (1 + waste/100))

The Brick Calculator estimates the number of bricks for a single-thickness wall from its face area, the brick size and the mortar joint. It works out how many bricks fit in each square meter, scales that to your wall, adds waste and rounds up to whole bricks.

How to use the Brick calculator

  1. Enter Net wall face area in square meters: wall length × height, minus windows and doors.
  2. Enter Brick face length and Brick face height in meters, using the actual brick dimensions, not the nominal ones.
  3. Enter Mortar joint in meters. 10 mm is 0.01, and 3/8 inch is 0.009525.
  4. Add a Waste allowance for cuts and breakage, then read the whole-brick count.

How the brick calculation works

FormulaBricks = ceiling(net area ÷ ((brick length + joint) × (brick height + joint)) × (1 + waste/100))

How the brick module works

Each brick occupies its own face plus one joint in each direction. A brick with a 215 × 65 mm face and 10 mm joints takes up a module of 225 × 75 mm, or 0.016875 m², so about 59.3 bricks cover each square meter. The calculator divides the wall area by this module, multiplies by your waste allowance and rounds up.

In the US, the Brick Industry Association describes modular brick by a nominal face of 8 × 2⅔ inches, which includes the joint; that works out to 144 ÷ (8 × 2⅔) = 6.75 bricks per square foot. If you instead enter the specified size of 7⅝ × 2¼ inches with a 3/8-inch joint, the module is 8 × 2⅝ inches and the count is about 6.86 per square foot, because 2¼ + 3/8 is slightly less than 2⅔.

What this estimate leaves out

The count is for one wythe, a single brick thickness, laid in a pattern where the brick's long face shows. Double-thickness walls need roughly twice as many, and bonds that show header ends, such as Flemish bond, change the count. Mortar volume, wall ties, lintels and footings are not included.

Brick walls that carry loads, retain soil or exceed modest heights need design by a qualified professional. Use this calculator for quantity estimates, not structure.

Worked example

A 12 m² garden wall with 215 × 65 mm bricks and 10 mm joints

Net wall face area: 12 m² · Brick face length: 0.215 m · Brick face height: 0.065 m · Mortar joint: 0.01 m · Waste allowance: 5 %

  1. Module: (0.215 + 0.01) × (0.065 + 0.01) = 0.225 × 0.075 = 0.016875 m².
  2. Bricks without waste: 12 ÷ 0.016875 = 711.11.
  3. With 5% extra: 711.11 × 1.05 = 746.67.
  4. Round up: 747 bricks.

Result: 747 bricks

Assumptions and limits

Single face/skin only; subtract openings. Joint approximated as a rectangular module. Bond patterns and load-bearing design excluded.

Formula and worked examples last checked November 20, 2026. Spotted a problem? Report an error.

Frequently asked questions

How many bricks are in a square meter?

With 215 × 65 mm bricks and 10 mm joints, about 59.3 per square meter of single-thickness wall. Larger bricks or thicker joints lower the number. Add waste on top.

How many bricks per square foot?

About 6.75 for US modular brick, based on its nominal 8 × 2⅔ inch face. Entering the specified size (0.193675 × 0.05715 m) with a 0.009525 m joint gives about 6.86 per square foot, a slightly more conservative figure.

Should I use actual or nominal brick size?

Enter the actual (specified) size and the joint separately. Nominal sizes already include the joint, so entering a nominal size plus a joint would count the joint twice and underestimate the bricks.

How do I account for a double brick wall?

Run the calculator for one face and double the result. The calculator models a single wythe only, so it does not include headers or ties that connect two layers.

Sources