1. Home
  2. Construction
  3. Gravel Calculator
Construction

Gravel Calculator

Estimate loose gravel volume for a rectangular area.

Your numbers

m²
m
%

Results update as you type. Nothing you enter is sent anywhere.

Result

2.2 m³

Volume = area × depth × (1 + waste/100). Loose gravel volume only. Compaction, settling and bulk density are not inferred; depth in meters, not centimeters.

Formula used

Volume = area × depth × (1 + waste/100)

The Gravel Calculator works out how many cubic meters of loose gravel you need to cover an area to a set depth, with an allowance for spreading losses. It suits driveways, paths, drainage beds, shed bases and patio sub-bases. The result is volume, which you can convert to cubic yards or ask your supplier to convert to tons.

How to use the Gravel calculator

  1. Enter Covered area in square meters. Use the Area Calculator first if you have a length and width, or multiply square feet by 0.0929.
  2. Enter Depth in meters. A 7.5 cm layer is 0.075 m; 3 inches is 0.0762 m.
  3. Set Waste allowance for spillage, uneven ground and edges. Compaction is not modeled, so allow for it here or order extra.
  4. Read the volume in m³, then multiply by 1.30795 for cubic yards.

How the gravel calculation works

FormulaVolume = area × depth × (1 + waste/100)

Volume, compaction and ordering by weight

The calculator returns loose volume: area × depth × (1 + waste ÷ 100). Crushed stone with fines compacts noticeably under a plate compactor or traffic, so a layer spread 10 cm loose ends up thinner once compacted. If your design depth is a compacted depth, ask your supplier how much extra loose material their product needs and add that to the waste allowance.

Many yards sell gravel by the ton rather than the cubic yard. The weight per cubic meter depends on the stone type, size and moisture, so this calculator does not guess it. Give the supplier your volume and product, and they will convert using the density of what they actually stock.

Depth for the job

Different jobs need very different depths, and each centimeter matters over a large area: on 25 m², every extra centimeter adds 0.25 m³. Decorative top layers are thin, while driveways usually need a deeper base of larger stone under a finer surface layer. For a layered build, run the calculator once per layer with that layer's depth and add the results.

Edging keeps gravel from migrating sideways, which reduces how much you lose over time. A weed membrane under decorative gravel does not change the volume you need.

Worked example

A 25 m² path 7.5 cm deep with 10% extra

Covered area: 25 m² · Depth: 0.075 m · Waste allowance: 10 %

  1. Convert the depth: 7.5 cm ÷ 100 = 0.075 m.
  2. Exact volume: 25 × 0.075 = 1.875 m³.
  3. With 10% extra: 1.875 × 1.10 = 2.0625 m³.
  4. In cubic yards: 2.0625 × 1.30795 ≈ 2.70 yd³.

Result: 2.0625 m³

Assumptions and limits

Loose gravel volume only. Compaction, settling and bulk density are not inferred; depth in meters, not centimeters.

Formula and worked examples last checked November 20, 2026. Spotted a problem? Report an error.

Frequently asked questions

How many cubic yards of gravel do I need?

Multiply area in square feet by depth in feet and divide by 27. A 10 × 20 ft area 3 inches deep is 200 × 0.25 ÷ 27 ≈ 1.85 yd³. Add a waste or compaction allowance on top.

How much area does a cubic yard of gravel cover?

At 3 inches deep, one cubic yard covers 108 ft² (27 ÷ 0.25). At 2 inches it covers 162 ft², and at 4 inches 81 ft². The thinner the layer, the further each yard goes.

How do I convert cubic meters of gravel to tons?

Multiply by the bulk density of the specific gravel, which suppliers can give you per product. Density varies with stone type, size and moisture, so ask rather than relying on a generic figure. This calculator stops at volume for that reason.

Should I add extra gravel for compaction?

Yes, if the design depth is measured after compaction. The calculator's waste allowance is the place to include it. Your supplier can say how much a particular crushed stone settles when compacted.

Sources