The Mulch Calculator estimates the volume of mulch needed to cover garden beds to a chosen depth. Enter the bed area, the depth you want and an allowance for top-up, and it returns cubic meters you can convert to bags or bulk cubic yards.
How to use the Mulch calculator
- Enter Covered area in square meters, adding up all beds. Exclude the space taken by large shrubs and paths that will not be mulched.
- Enter Depth in meters. A 5 cm layer is 0.05 m; 3 inches is 0.0762 m.
- Set Waste allowance for spreading losses and settling; fresh, fluffy mulch shrinks as it settles.
- Read the volume in m³. Multiply by 35.3147 for cubic feet to compare with bag sizes, or by 1.30795 for bulk cubic yards.
How the mulch calculation works
How deep to spread mulch
Extension services generally recommend a layer of 2 to 3 inches (about 5 to 7.5 cm). Oklahoma State University suggests about 2 inches for fine mulches and 3 inches for coarse ones. Iowa State suggests 3 to 4 inches around trees and shrubs on well-drained sites, but 2 to 3 inches on heavy soils. Rutgers advises not exceeding 3 inches in total, counting what remains from previous years.
That last point changes the calculation. If 2 inches of old mulch is still in place and you want 3 inches in total, enter a 1-inch (0.0254 m) top-up depth rather than the full 3. Keep mulch pulled back a few inches from tree trunks and plant stems.
Bags or bulk?
Bagged mulch is labeled by volume, often in cubic feet or liters. Divide the cubic feet from this calculator by the bag size and round up: a bag labeled 2 cubic feet holds about 0.0566 m³. Bulk mulch is usually sold by the cubic yard and delivered by the yard or half yard, which is cheaper for large areas.
The calculator does not know the mulch type. Shredded bark, wood chips, pine straw and compost all settle differently, so use the waste allowance to reflect how fresh and fluffy your product is.
Worked example
Covered area: 12 m² · Depth: 0.075 m · Waste allowance: 5 %
- Convert the depth: 7.5 cm = 0.075 m, close to 3 inches.
- Exact volume: 12 × 0.075 = 0.9 m³.
- With 5% extra: 0.9 × 1.05 = 0.945 m³.
- In cubic feet: 0.945 × 35.3147 ≈ 33.4 ft³, or 17 bags of 2 ft³ (33.4 ÷ 2 = 16.7, rounded up).
Result: 0.945 m³
Assumptions and limits
Loose mulch volume only. Compaction, settling and bulk density are not inferred; depth in meters, not centimeters.
Formula and worked examples last checked November 20, 2026. Spotted a problem? Report an error.
Frequently asked questions
How many bags of mulch do I need?
Find the volume in cubic feet and divide by the bag size. 100 ft² at 3 inches deep is 100 × 0.25 = 25 ft³, which is 13 bags of 2 ft³ (12.5 rounded up). Add a small allowance for settling.
How much area does a yard of mulch cover?
One cubic yard (27 ft³) covers 108 ft² at 3 inches deep, 162 ft² at 2 inches and about 324 ft² at a 1-inch top-up. Divide 324 by the depth in inches for any other depth.
How deep should mulch be?
University extension services generally recommend 2 to 3 inches, with fine mulches at the low end and coarse ones at the high end. Deeper layers can harm plants, and the total should include old mulch still in place.
Do I need to remove old mulch before adding new?
Not necessarily, but count it. If the existing layer is already 2 inches, add only enough to reach your target depth, and enter that top-up depth here rather than the full depth.